---
{"title": "How to keep voice contact between machine and wrecking crew", "description": "Keep voice contact between the machine operator and the wrecking crew with a plan, a set of plain calls, and a few tool options to compare.", "url": "https://2dig.com/how-to-keep-voice-contact-between-the-machine-and-the-wrecking-crew-for-demolition-and-wrecking-crews/", "date": "2026-10-23"}
---
Keep voice contact between the machine operator and the wrecking crew with a plan, a set of plain calls, and a few tool options to compare.

Keep voice contact with one shared channel that every crew member can hear over the job noise, backed by a plain set of calls and a fallback. OperatorLink is one option that lets anyone who joins take part in a voice call run from a phone browser. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the machine moves, the machine operator and every member of the wrecking crew need a way to talk that works over the noise of the job. Decide on the channel before the first cut, and make sure every person knows how to reach it. Check that each phone or radio is charged and has a working connection for the whole shift.

Agree on a short set of plain calls, such as Go Ahead, Copy That and All Clear, so nobody has to guess what a short message means. OperatorLink has one-tap calls with those names, and they are sent as chat messages. [^1]

Name one person to start the channel and share access with the crew. On OperatorLink, the person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Keep a backup channel ready in case the main one fails, and agree on who speaks first when a problem appears so two people do not talk over each other.

## Step by step

1. Confirm every crew member can reach the channel before the machine moves. Test it with a short call from the operator's position.
2. Agree on the calls in advance, including Go Ahead, Copy That, All Clear, and one clear word for stop.
3. Place the signal person where the operator can see them and hear the channel at the same time.
4. Before each move, the signal person calls the move and waits for Copy That from the operator.
5. The operator repeats the move back before starting it, so both people know the same thing.
6. Keep the channel open while the machine works. On OperatorLink, anyone who joins can take part in a voice call run from the phone browser. [^1]
7. When a stop is called, everyone stops talking over the machine and waits for an All Clear. On OperatorLink, STOP cancels the movements a phone is still holding, on every phone, and shows a full-screen alert to everyone else. [^1]
8. At the end of the work, close the channel and confirm nobody is left in it, so the next shift starts clean.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] Nobody needs to install an app, because the page runs in a browser. [^1] The one-tap calls go out as chat messages, and anyone who joins can take part in a voice call. [^1] [^1]

A phone video call app is a second option. No facts are available for this page about how one works, so check whether the call can stay open for the whole shift, whether the operator can hear it over the machine, and whether the phone locks its screen during the work.

A two-way radio is a third option. No facts are available for this page about its range or set-up, so check that the crew agrees on plain calls, that every member can hear it over machine noise, and that the channel stays clear through the job.

Match the option to the crew and the site, and keep a fallback ready, because a browser-based channel depends on each phone's data connection.

## Common mistakes to avoid

Relying on one phone or one radio with no backup. If that device loses its connection or battery, the crew loses its voice channel, so keep a second way to talk ready.

Talking over each other during a move. Agree in advance on who calls the move and who answers, and keep the calls short.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the lift. [^1]

Leaving an empty session open and expecting it to be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

Reusing an old link from an earlier shift. A jobsite link stops working 12 hours after the first person joins it. [^1]

Assuming a move got through. On OperatorLink, a move that stops arriving for 2 seconds is dropped by the other phones, so the operator should confirm each move before acting on it. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser, so there is no app to install before the crew can join a call. [^1] Check that each phone's data connection will last the whole shift before relying on it, and keep a backup channel ready for the job.

### Can anyone on the crew join a voice call on OperatorLink?

Anyone who joins a jobsite can take part in a voice call run from the phone browser. [^1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [^1] Have the operator and the signal person both in the call before the machine moves, so each one hears the same instructions from the start.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new shift, start a fresh jobsite and share its new link or QR code, so the crew is not trying to join an old session.

### Do OperatorLink alerts buzz on an iPhone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so an iPhone user may only notice an alert on the screen. Check the sound and screen settings on every phone before the lift, and let the operator know which phones will give an alert and which will not.

### What happens when STOP is pressed on OperatorLink?

STOP cancels the movements a phone is still holding, on every phone, and shows a full-screen alert to everyone else. [^1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [^1] Because a screen alert can be missed when a phone is out of view, the crew should still call out any stop by voice.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
