---
{"title": "Keep voice contact across a loud pile driving site", "description": "This page explains how pile driving crews keep voice contact across a loud driving site. What to have ready, the steps, tool choices and common mistakes.", "url": "https://2dig.com/how-to-keep-voice-contact-across-a-loud-driving-site-for-pile-driving-crews/", "date": "2026-11-03"}
---
This page explains how pile driving crews keep voice contact across a loud driving site. What to have ready, the steps, tool choices and common mistakes.

Voice contact kept across a loud driving site for pile driving crews, using a phone browser session with a link or QR code, a voice call in the browser, and one-tap radio-style chat messages.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

To keep voice contact across a loud driving site, each crew member needs a phone with a working browser and a data signal, because voice and chat travel through the phone network. [^1] The person who starts the jobsite shares a link or QR code, and the rest of the pile driving crew joins from it. [^1] A jobsite link stops working 12 hours after the first person joins it, so plan the shift length and share a new link for the next one if the shift runs long. [^1] If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a stopped-shift session may need to be started fresh when the crew comes back. [^1] Decide whose phone carries the chat and voice session, since the rest of the crew reaches that one through the link, and HOLD and SLOW on any phone stay on for everyone until the last person leaves. [^1] Before the shift starts, add the page to the phone's home screen so it opens as a standalone app and the screen stays available during the work. [^1]

## Step by step

1. Check each phone has a working browser and a data signal for the whole shift, because voice and chat pass between phones in a browser. [^1]
2. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [^1]
3. That person shares the link or QR code with the pile driving crew, and each member joins from it. [^1]
4. Confirm every crew member is in the session before the hammer starts, so each one can hear the voice call and send chat. [^1] [^1]
5. Run a quick voice check by asking each member to say a short phrase, so the volume and clarity match the driving site before the first blow. [^1]
6. Use one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages, so the meaning is clear when the hammer covers speech. [^1]
7. Keep the voice call open through the lift and the next blow, so the operator and signal person stay in touch without shouting across the site. [^1]
8. When the shift ends, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages, and anyone who joins can take part in a voice call run from the phone browser. [^1] [^1] It is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view of the camera, and whether the phone locks its screen mid-shift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over hammer noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready since voice over a phone browser depends on the phone's data signal.

## Common mistakes to avoid

Relying on one phone for the voice call: if that phone's data signal drops, the rest of the crew loses the channel, so keep a radio or hand signal ready as a fallback. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the shift starts. [^1] Leaving an empty session and expecting it to hold the chat the next day: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that a jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] Letting the phone go to sleep mid-shift; adding the page to the home screen as a standalone app helps the screen stay available. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The voice call is run from a phone browser, so the phone still needs a working data signal for the shift. Check the phone's data plan before relying on it.

### What happens when the STOP button is pressed?

STOP stops every move a crew member is still holding down, on every phone in the session, and shows a full-screen alert to everyone else, so the crew sees it at once. [^1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [^1]

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1]

### Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [^1] Check the sound and screen settings on every phone in the crew before the shift starts so nobody misses the signal.

### Can crew members talk over the phone during a pile lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback. [^1]

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
