---
{"title": "How precast yard crews can share one jobsite on phone browsers", "description": "Steps, tool options and common mistakes for precast yard crews using a shared jobsite session on phone browsers, with STOP, HOLD and SLOW signals.", "url": "https://2dig.com/how-to-keep-the-whole-yard-crew-on-one-channel-for-precast-yard-crews/", "date": "2026-11-07"}
---
Steps, tool options and common mistakes for precast yard crews using a shared jobsite session on phone browsers, with STOP, HOLD and SLOW signals.

A precast yard crew can join one shared jobsite session from phone browsers, with one person sharing a link or QR code. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew on their phones and carries calls and chat, with no app to install [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

To join the shared jobsite, each person needs a phone with a working browser and a data signal, because the signals pass between phones in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [^1] A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] If everyone leaves and the session sits empty, it is wiped after 3 idle hours, so a session from a stopped shift may need to be started again. [^1] Agree on which signals the crew will rely on, since HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [^1] Optionally, a phone can have the page added to its home screen, where it opens as a standalone app. [^1] Finally, agree on the plain calls the yard uses, such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [^1]

## Step by step

1. Check each phone has a working browser, because the signals pass between phones in a browser. [^1]
2. The jobsite session runs with no app install needed. [^1]
3. That person shares the link or QR code with the whole yard crew, and each member joins from it. [^1]
4. Confirm every crew member is in the session before the first move, so everyone sees the same signals. [^1]
5. Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]
6. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while the move is in progress. [^1]
7. When STOP is pressed, every held direction is released on every phone and a full-screen alert shows to everyone else, so the crew pauses and looks before moving again. [^1]
8. Use the one-tap calls such as Go Ahead, Copy That and All Clear for routine calls, since they are sent as chat messages. [^1]
9. At the end of the shift, everyone leaves the session, and a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew on their phones, and carries calls and chat between them. [^1] It works on the phone with no app to install. [^1] Anyone who joins can take part in a voice call on the phone with no app to install. [^1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether a crew member's hands stay free while on the call, and whether the phone's screen locks partway through a move.

A two-way radio is a third option. No facts here describe one, so check that every crew member can be heard over yard noise, that the channel stays clear through the shift, and that the crew agrees on plain calls before work starts.

Match the option to the crew and the yard, and keep a fallback ready, since the browser option depends on each phone's data signal. [^1]

## Common mistakes to avoid

Relying on one phone for STOP: signals pass between phones in a browser, so keep a voice or hand signal ready as a fallback. [^1] Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [^1] Reusing an old link: a jobsite link stops working 12 hours after the first person joins it. [^1] Leaving an empty session and expecting it to hold: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [^1] Assuming a move keeps going after the button is let go: holding a move button keeps sending that move, and if it stops arriving for 2 seconds, the other phones drop it. [^1] Skipping the home screen step: adding the page to the home screen lets it open as a standalone app. [^1]

## Frequently asked questions

### Is OperatorLink free to use for precast yard crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser with no app install, so a crew can start from the phones it already carries. [^1] Each phone still needs a working data signal for the whole shift, so check the data plan on every phone before relying on it. [^1]

### What happens when someone presses STOP in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the rest of the crew sees the alert. [^1] HOLD and SLOW behave differently, because they stay on for everyone in the jobsite until the last person leaves. [^1] On Android browsers the STOP signal also makes the phone buzz, while iPhone Safari ignores the buzz, so check the screen on every iPhone as well. [^1]

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a fresh shift, have the person who starts the jobsite share a new link or QR code with the whole crew. [^1]

### Can the whole yard crew join OperatorLink from their own phones?

Yes, the crew joins from their own phones. [^1] The person who starts the jobsite shares a link or QR code, and each member joins from it. [^1] Once joined, a crew member can take part in a voice call run from the phone browser, and one-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Keep a radio or hand signal ready as a fallback.

### Does OperatorLink need an app installed on each phone?

No app install is needed, because OperatorLink works on the phone you already carry. [^1] A phone can also add the page to its home screen, where it opens as a standalone app. [^1] Adding it before the shift lets a crew member open it from the home screen, and the session still starts from the shared link or QR code. [^1] Check that each phone's browser is up to date before the first lift.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
