---
{"title": "Keep the loading team on one channel for heavy haul", "description": "How heavy haul and transport crews keep the whole loading team on one channel: what to have ready, the steps, tool choices and common mistakes.", "url": "https://2dig.com/how-to-keep-the-whole-loading-team-on-one-channel-for-heavy-haul-and-transport-crews/", "date": "2026-11-03"}
---
How heavy haul and transport crews keep the whole loading team on one channel: what to have ready, the steps, tool choices and common mistakes.

A loading team on a heavy haul job can share one channel by joining a single OperatorLink jobsite session from a phone browser, with one person sending the link or QR code. [^1] [^1] STOP releases every held direction and shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [^1] [^1] On Android browsers signals make the phone buzz, iPhone Safari ignores the buzz, and a jobsite with nobody in it is wiped after 3 idle hours. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Heavy haul and transport crews need one shared channel for the loading team, and the crew joins a single jobsite session from a phone browser, using a link or QR code sent by whoever starts it. [^1] [^1] Each phone needs a working data signal for the whole move, because button presses and voice pass between phones over that browser connection. [^1] A jobsite link stops working 12 hours after the first person joins it, so send the link at the start of the move rather than reusing one from an earlier load. [^1] Decide who will hold the session open, since HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [^1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left idle over a break may need to be started fresh. [^1] Before the move, add the page to each phone's home screen so it opens as a standalone app. [^1]

## Step by step

1. Check that every phone opens a browser and has a data signal for the whole move, since button presses and voice pass between phones in that browser. [^1]
2. The person starting the session opens it in a phone browser, and no app needs to be installed. [^1]
3. That person sends the link or QR code to the team, and each member joins from it. [^1]
4. Before the move starts, check that every loader and spotter is in the session, since it shows STOP, HOLD and SLOW to the whole crew. [^1]
5. Agree on the plan for HOLD and SLOW, which stay on for everyone in the jobsite until the last person leaves. [^1]
6. A held move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it, so keep watching the load while the button is held. [^1]
7. Pressing STOP releases every held direction on every phone and puts a full-screen alert on everyone else's screen, so the team stops and checks before moving again. [^1]
8. When the move is done, everyone leaves the session, and note that a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] No app install is needed, because the session runs in the phone's browser. [^1] Whoever opens the session sends the link or QR code, and each team member joins from it. [^1]

A phone video call app is one option the team could weigh. The facts here do not describe one, so check whether the call can stay open for the whole move, whether the spotter's hands stay in view, and whether the phone locks its screen during a lift.

A two-way radio is another option. The facts here do not describe one, so check that the team agrees on plain voice calls, that each member can be heard over engine and equipment noise, and that the channel stays clear through the move.

Match the option to the team and the site, and keep a fallback ready, since browser signals depend on each phone's data connection.

## Common mistakes to avoid

Depending on one phone to show the STOP signal: if that phone loses its data signal, the alert may not reach the rest of the team, so keep a voice or hand signal ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [^1] Expecting an empty session to still be there the next day: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so they remain in effect even after the phone that set them has left. [^1] Assuming a move still arrives: if it stops arriving for 2 seconds, the other phones drop it. [^1] Letting the phone sleep during a move; the page can be added to the home screen as a standalone app. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Because the session runs in a phone browser, each phone still needs a working data signal for the move, so check the phone's data plan before relying on it.

### What happens when the STOP button is pressed?

Pressing STOP releases every held direction on every phone in the session and puts a full-screen alert on everyone else's screen, so the team sees it at once. [^1] HOLD and SLOW work differently: they stay on for everyone until the last person leaves the jobsite. [^1]

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins, so a link from an earlier move may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new move, start a fresh session and send the new link or QR code to the team. [^1]

### Do STOP signals buzz on every phone?

Android browsers buzz when a signal such as STOP arrives. [^1] iPhone Safari does not buzz, so on an iPhone the alert shows on screen only. Before a load moves, check each phone's sound and screen settings so every team member notices a signal.

### Can crew members talk over the phone during a lift?

Everyone who joins the session can take part in a voice call run from the phone browser, and one-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Voice runs over the phone browser, so keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
