---
{"title": "How to keep gear set up the same across rental yard units", "description": "A yard routine for matching controls, attachments and settings across units of the same machine, with the steps, the tool choices and the mistakes to avoid.", "url": "https://2dig.com/how-to-keep-gear-set-up-the-same-across-units-for-equipment-rental-yard-managers/", "date": "2026-11-02"}
---
A yard routine for matching controls, attachments and settings across units of the same machine, with the steps, the tool choices and the mistakes to avoid.

Match every unit to one written setup sheet, check it the same way on the bench and at handover, and record who signed it off. A shared session in a phone browser lets the crew see the same STOP, HOLD and SLOW and talk over the page while two units are lined up. [^1] [^1] The person who starts the session shares a link or QR code, and the crew joins from it. [^1] The settings each unit must match can travel in the same session chat, with one-tap radio-style calls such as Copy That landing there as messages. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, with no paid plan built yet [^1] | not published |
| Phone group chat app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
| Paper setup sheet kept on the machine | not published | not published | not published |

## What you need before you start

Keeping gear set up the same across units starts with a written setup sheet for each machine model in the yard. The sheet lists what has to match unit to unit: the attachment fitted, the control pattern, the travel limits and the guards the unit goes out with. Every line carries the unit's yard number, so a checked unit is not confused with the one parked beside it.

A phone with a working browser and a data signal puts the crew on one shared page, because the signals travel over the phone network. [^1] The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [^1] Decide whose phone shows HOLD and SLOW, because those two signals stay on for everyone until the last person leaves the jobsite. [^1] Before the first unit is set, add the page to each phone's home screen so it opens as a standalone app. [^1] A jobsite link stops working 12 hours after the first person joins it, so a sheet started on the early shift will not open on the late one. [^1]

## Step by step

1. Write one setup sheet per machine model, naming every setting that must match and the position each control should sit in before the unit leaves the yard.
2. Give the sheet a line for the yard number, the fitter's name and the date, so the next person can tell which unit was checked and when.
3. Set the first unit strictly to the sheet, then treat that unit as the reference for the rest of the fleet.
4. Check the second unit against the first, setting by setting, at the same point in the pre-delivery check rather than from memory.
5. Open one session in a phone browser before the work starts, with no app install needed. [^1]
6. Have the person running the setup share the link or QR code, then confirm each crew member has joined from it. [^1]
7. Write each setting into the session chat as it is confirmed, so the record sits where the crew is already looking. [^1] Where the crew sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear, those land in the same chat as messages. [^1]
8. Agree on which signals stay on for the whole session: HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]
9. While two units are lined up side by side, holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it, so keep the button held and watch the machine. [^1]
10. If someone presses STOP, it releases every held direction on every phone and shows a full-screen alert to everyone else, so stop, look at the unit and restart deliberately. [^1]
11. Sign the sheet off for each unit and file it with the unit's paperwork before that unit goes to the customer.
12. A jobsite with nobody in it is wiped after 3 idle hours, so keep any setup notes needed for the next shift in the yard's own records. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Anyone who joins can take part in a voice call run from the phone browser, which is one way to talk a second unit into the same settings as the first. [^1]

A phone group chat app is a second option. No facts here describe one, so check whether the messages stay in order through a shift, whether a fitter on a bench with poor signal still receives them, and whether the yard can read the thread afterwards as a setup record.

A two-way radio is a third option. No facts here describe one, so check that the yard's channel reaches the far end of the lot, that each fitter has a radio charged, and that the settings read out over voice are written down somewhere.

A paper setup sheet kept on the machine is a fourth option. No facts here describe one, so check that the sheet is still on the unit when the next crew takes it over, that it is the current version, and that a change made on one unit gets onto the sheet the others are checked against.

Choose a tool that suits the crew's work area and how the yard records settings. For OperatorLink, button presses, chat and voice pass between phones in a browser, so the phones need a working data signal. [^1] Keep a fallback ready for work where the phone signal may drop.

## Common mistakes to avoid

Checking settings from memory instead of the sheet: the second unit then gets what the fitter remembers, not what the sheet lists, so keep the sheet with the unit until it leaves the yard. Relying only on a phone browser for STOP: the signals pass between phones in a browser, so keep a voice or hand option ready if the data signal drops. [^1] Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Leaving an empty session and expecting it to hold the setup notes the next morning: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [^1] Letting the phone go to sleep mid-setup; adding the page to the home screen as a standalone app helps the screen stay available. [^1]

## Frequently asked questions

### Is OperatorLink free for a rental yard to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Each phone in the crew still needs a working data signal for the shift, so check the yard's phone plan before relying on it. Nothing has to be installed, because the page runs in a phone browser. [^1]

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a fresh shift, start a new session and share the new link or QR code with the crew.

### What happens when the STOP button is pressed in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW work differently: they stay on for everyone until the last person leaves the jobsite. [^1] Check the unit before moving anything again.

### Do OperatorLink STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on the screen. Check the sound and screen settings on every phone in the crew before the first unit is set, so nobody misses a signal.

### Can a rental yard crew talk over OperatorLink while setting up a unit?

Anyone who joins the jobsite can take part in a voice call run from the phone browser [^1], and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Voice depends on the phone's data signal, so keep a radio or hand signal ready for the parts of the yard where the signal drops.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
