---
{"title": "How to keep rented crane crews on one channel", "description": "Steps for crane rental fleet managers to keep every rented crane crew on a common channel, with tool options and common mistakes to avoid.", "url": "https://2dig.com/how-to-keep-every-rented-crane-crew-on-a-common-channel-for-crane-rental-fleet-managers/", "date": "2026-10-22"}
---
Steps for crane rental fleet managers to keep every rented crane crew on a common channel, with tool options and common mistakes to avoid.

Put every rented crane crew in one OperatorLink jobsite session, and have the person who starts it share a link or QR code that the crews open in a phone browser. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the first lift, a crane rental fleet manager needs a short list of things ready. Start with the crews: know which rented crane crews are on each job, who will carry a phone, and who is the signal person for each lift. Button presses, chat and voice pass between phones in a browser. [^1]

Agree on one person per jobsite who will start the session, and decide how the link or QR code will reach each crew before the crane arrives. Settle which signals must stay on for everyone, such as a hold that should not clear until the lift is finished. Check the sound and screen settings on every phone, since phones alert differently. [^1]

Confirm the rental contract and site rules allow phones at the controls and on the ground. Check whether the crews already share a radio channel, so you know what the new channel must replace or sit beside.

## Step by step

1. Make a list of every rented crane and its crew, with the phone each member carries.
2. Choose one channel for all crews on the site, and name the person who will open it.
3. Have that person open the session from a phone browser, which needs no app install. [^1]
4. Share the link or QR code with each rented crew before any lift starts. [^1]
5. Ask every crew to confirm they are in the session before the first lift. [^1]
6. Agree on the stop rule with all crews, including who may press STOP and what each crew does when it shows. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]
7. Agree when HOLD and SLOW will be cleared, since they stay on for everyone until the last person leaves. [^1]
8. Tell operators that holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds the others drop it, so keep the button held while the load is watched. [^1]
9. Use the quick calls such as Go Ahead, Copy That and All Clear for routine replies, which are sent as chat messages. [^1]
10. At the end of each job, have everyone leave the session. A jobsite with nobody in it is wiped after 3 idle hours. [^1]
11. Before the next job, start a fresh session, because a jobsite link stops working 12 hours after the first person joins. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] It runs in a phone browser with no app install, so the crew opens the link rather than downloading anything. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1] The app can be added to a phone's home screen as a standalone app. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is a second option. No facts for it are set out here, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen during a lift.

A two-way radio is a third option. No facts for it are set out here, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Match the option to the crews and the site, and keep a fallback ready.

## Common mistakes to avoid

Relying on one phone for STOP. Keep a voice or hand signal ready as well.

Assuming every phone alerts the same way. Android browsers buzz on signals such as STOP, while iPhone Safari ignores the buzz, so check screens and sound on each device. [^1]

Reusing an old link or leaving an empty session open. Links stop working 12 hours after the first join, and an empty session is wiped after 3 idle hours. [^1] [^1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [^1]

Assuming a held move keeps going on its own. If a move stops arriving for 2 seconds, the other phones drop it. [^1]

Letting a phone lock its screen during a lift. The app can be added to a phone's home screen as a standalone app. [^1]

## Frequently asked questions

### Is OperatorLink free for rental fleets?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Crews join from a phone browser. [^1]

### What does the STOP button do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the jobsite. [^1] Agree before the first lift which crew members may press STOP, so every crew knows who can stop the site.

### How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For each new shift, start a fresh session and share the new link or QR code with every rented crew, so no crew joins from an old link.

### Does OperatorLink buzz phones when STOP is pressed?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so an iPhone may show the alert only on its screen. Check the sound and screen settings on every phone in each rented crew before the lift, so no one misses a signal.

### Can OperatorLink handle crew talk during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a radio or hand signal as a fallback for the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
