---
{"title": "How bulk material handlers keep contact with the yard supervisor", "description": "Ways bulk material handlers can keep contact with the yard supervisor, what to prepare before the shift, the steps to follow, and the options to compare.", "url": "https://2dig.com/how-to-keep-contact-with-the-yard-supervisor-for-bulk-material-handlers/", "date": "2026-11-07"}
---
Ways bulk material handlers can keep contact with the yard supervisor, what to prepare before the shift, the steps to follow, and the options to compare.

OperatorLink passes chat, one-tap quick calls and voice calls between phones in a phone browser, with no app install needed. [^1] [^1] [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | OperatorLink shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Two-way radio | not published | not published | not published |
| Phone calls and text messages | not published | not published | not published |

## What you need before you start

To keep contact with the yard supervisor, each handler and the supervisor needs a phone with a working browser, because messages and calls can pass between phones in a browser. [^1] Decide who will start the shared session, since that person shares the link or QR code with everyone else. [^1] A link stops working 12 hours after the first person joins, so a later shift may need a fresh link. [^1] A session with nobody in it is wiped after 3 idle hours, so agree in advance who will reopen it if the shift changes. [^1] Also agree which phone the supervisor will carry and where it will be during the shift. Check each phone's data plan and battery before the shift begins, because nothing on this page covers them.

## Step by step

1. Before the shift, agree on one way to keep in touch and confirm that every phone can receive a test message.
2. Have the person who starts the session open it on a phone browser, with no app install needed if the crew uses OperatorLink. [^1]
3. That person shares the link or QR code with the handlers and the supervisor, and each one joins from it. [^1]
4. Confirm that every person is in the session before work starts, so each one can see the same messages.
5. Use chat for short written updates, such as a change of load or a change of area. Chat passes between phones in a browser. [^1]
6. For routine replies, use a one-tap quick call such as Go Ahead, Copy That or All Clear, which is sent as a chat message. [^1]
7. For a longer conversation, start a voice call. Anyone who joins can take part. [^1]
8. Keep the link for the shift, and remember it stops working 12 hours after the first person joins. [^1]
9. A session with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It passes chat, one-tap quick calls and voice calls between phones in a phone browser. [^1] [^1] [^1] Nothing needs to be installed, and the person who starts a session shares a link or QR code that the crew joins from. [^1] [^1]

Details about a two-way radio are not published here. Check whether every crew member can hear and be heard over the noise on the site, whether the channel stays clear, and whether the supervisor has a radio of their own.

Phone calls and text messages are a third option. No facts here describe them, so check whether a handler can keep a call open while working, and whether the supervisor will see a text in time to act on it.

Match the option to the crew and the site, and keep a backup ready in case one way of reaching the supervisor fails.

## Common mistakes to avoid

Relying on one phone for every update: if that phone loses its connection, the supervisor may not get the message, so keep a second way to reach them ready. Sharing an old link after a shift: a link stops working 12 hours after the first person joins. [^1] Expecting an empty session to wait for the next shift: a session with nobody in it is wiped after 3 idle hours. [^1] Assuming everyone has joined: confirm each handler and the supervisor is in the session before work starts. Treating a quick call as a full conversation: one-tap calls such as Go Ahead and Copy That are sent as chat messages, so start a voice call when a longer talk is needed. [^1] [^1] Letting a phone lock its screen during the shift without checking that it still shows incoming messages.

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Because it runs in a phone browser, each phone still needs a working data signal for the whole shift. Check the phone's data plan and signal before relying on it for a shift, since those depend on the phone and the carrier rather than on the app.

### How long does an OperatorLink session link stay active?

A link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A session with nobody in it is wiped after 3 idle hours. [^1] For a new shift, start a fresh session and share its new link or QR code with the yard crew.

### Can OperatorLink handle voice calls between phones?

Anyone who joins the session can take part in a voice call run from the phone browser. [^1] One-tap quick calls such as Go Ahead, Copy That and All Clear are sent as chat messages instead. [^1] Before relying on a voice call during a shift, check that each phone can hear and be heard clearly on the site.

### Does OperatorLink need an app install?

No. It runs in a phone browser with no app install. [^1] A phone can also add the page to its home screen as a standalone app. [^1] Either way, check that each phone has a working data signal before the shift begins, so messages can reach the supervisor in time.

### How does a crew join an OperatorLink session?

The person who starts the session shares a link or QR code, and the crew joins from it. [^1] Joining happens in a phone browser, so nobody needs to install an app first. [^1] Keep the link with the people who should be in the session, and confirm everyone has joined before work starts.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
