---
{"title": "How bridge inspection crews keep deck-to-ground contact", "description": "Steps for keeping contact between the deck and the ground on a bridge inspection, with what to have ready, tool options and common mistakes.", "url": "https://2dig.com/how-to-keep-contact-between-the-deck-and-the-ground-for-bridge-inspection-crews/", "date": "2026-11-07"}
---
Steps for keeping contact between the deck and the ground on a bridge inspection, with what to have ready, tool options and common mistakes.

Keeping contact between the deck and the ground comes down to one agreed set of signals, a named person on each side, and a backup for when a signal fails. OperatorLink is one option. It shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | It shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser. [^1] | OperatorLink is currently free to use, and no paid plan is built yet. [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the first inspection, the deck crew and the ground crew need to agree on the signals they will use and what each one means. Write the signals down and make sure both crews have seen them, because a signal that only one side knows does no good. Name one person on each side who sends and receives signals, and make sure both can be reached for the whole inspection.

Check every radio or phone before the work starts, including its battery, its signal and whether its sound is on. Plan a backup for the moment the main channel fails, such as a second phone or a plain voice call, and agree on it in advance. Decide who on the deck can stop the work, and make sure the ground crew knows how that person will signal it.

Finally, confirm that everyone who needs the signals has the channel open before anyone moves onto the structure. Keep a copy of the signal list at the ground station and at the deck access point, so a new crew member can read it at once.

## Step by step

Follow these steps in order each time the crews start work.

1. Agree on a short set of signals, such as stop, hold and slow, and what each one means on the deck.
2. Name the person on each crew who sends and receives the signals.
3. Test the link between the deck and the ground with every device before the first move.
4. Confirm that each crew member can see and hear the signals from where they will stand.
5. Agree which signals stay in effect until the crew clears them, and who is allowed to clear them.
6. When anything looks wrong, send the stop signal first, and have everyone pause until the lead gives the all-clear.
7. Keep the channel open for the whole shift, and check it again at each change of position.
8. At the end of the shift, close the channel and confirm that nothing is left running for the next crew.

## Tools for keeping contact between the deck and the ground

OperatorLink is made by the team that publishes this site, and it is one of three options here. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] It runs in a phone browser with no app install. [^1] The app can be added to a phone's home screen as a standalone app. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]

For a phone video call app, check whether the crew can keep the call open for the whole shift, whether the person on the deck stays in view of the ground crew, and whether the phone locks its screen during a move.

Details on a two-way radio are not published here, so check that the crew agrees on plain voice, that every member can be heard over the noise on site, and that the channel stays clear for the whole inspection.

Match the option to the crew and the site, and keep a fallback ready, since a phone browser depends on each phone's signal.

## Common mistakes to avoid

Relying on one phone or one channel for STOP. If that phone loses its signal, the rest of the crew may not see the stop, so keep a plain voice or hand signal ready as well.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [^1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [^1]

Reusing an old link from an earlier shift. A jobsite link stops working 12 hours after the first person joins it. [^1]

Leaving an empty session and expecting it to be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

Holding a move button and assuming every move reaches the crew. Holding a move button keeps sending that move to the other phones, and they drop it if it stops arriving for 2 seconds. [^1] Check that each move is sent once it is pressed, and repeat it if the crew does not see it.

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser with no app install, so check that each phone has a working browser and a signal before the work starts. Button presses, chat and voice pass between phones in the browser. [^1] Test the setup on every phone at least once before the first move, so no one finds a problem mid-inspection.

### What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the jobsite. [^1] Agree before the work begins who may press STOP, and make sure the crew pauses until the lead gives the all-clear.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For each new shift, the person who starts the jobsite shares a new link or QR code, so nobody works from an old one. [^1]

### Does OperatorLink buzz every phone when a signal is sent?

On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Confirm that each iPhone shows the alert on screen, and check the sound and screen on every phone before the work starts. Agree on a second way to get the attention of anyone holding an iPhone, such as a voice call or a hand signal.

### Can OperatorLink carry voice between the deck and the ground?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a plain voice or hand signal ready as a fallback, in case a phone drops out of the session during the inspection.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
