---
{"title": "Hear STOP and SLOW Calls Near Power Lines", "description": "Learn how boom truck operators can hear STOP and SLOW calls near power lines, prepare crew phones, compare communication options and avoid missed signals.", "url": "https://2dig.com/how-to-hear-stop-and-slow-calls-when-the-boom-nears-power-lines-for-boom-truck-operators/", "date": "2026-11-02"}
---
Learn how boom truck operators can hear STOP and SLOW calls near power lines, prepare crew phones, compare communication options and avoid missed signals.

Before moving a boom near power lines, agree on the signals, confirm how the operator and ground crew will communicate, and check that the chosen method works for everyone on site. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] On Android browsers signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [^1] Check how the alert appears on each phone before work starts.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [^1] | Currently free to use, with no paid plan built yet. [^1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
| Agreed hand signals | not published | not published | not published |

## What you need before you start

Before bringing a boom near power lines, have a clear communication plan for the operator and the ground crew. Agree on what STOP, HOLD and SLOW mean, who will call each signal, and how the operator will acknowledge it. Choose a communication method that the crew can hear or see from their working positions.

Check the communication equipment before starting the lift. If the crew uses phones, make sure each phone has a working browser and data signal. OperatorLink passes button presses, chat and voice between phones in a browser, and it does not require an app install. [^1] [^1]

The person starting an OperatorLink jobsite needs to share a link or QR code so the crew can join. [^1] Confirm that everyone has joined and understands how alerts appear on their phone. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1]

Decide what the crew will do if a call cannot be heard or a phone loses its data signal. Keep an agreed backup communication method ready. Before approaching power lines, follow the site's electrical hazard procedures and confirm the required clearances with the responsible person. Do not rely on a phone alert alone to judge distance from a power line.

## Step by step

1. **Agree on the signals before moving the boom.** Confirm what STOP, HOLD and SLOW mean to the operator and the ground crew. Make sure everyone knows who can issue a signal and how the operator will acknowledge it.

2. **Choose a communication method the crew can use from its working positions.** Consider whether the operator can hear a voice call, see a phone alert or use another agreed signal without losing attention to the lift. Check the method before the boom approaches the power lines.

3. **Check each phone or radio before starting.** For phone-based communication, confirm that the browser opens and the phone has a working data signal. OperatorLink runs in a phone browser and passes button presses, chat and voice between phones. [^1] For a radio or another method, check that the crew can communicate clearly using the equipment selected.

4. **Start the jobsite session if using OperatorLink.** The person starting the jobsite shares a link or QR code. Each crew member joins using that link or code. [^1] Confirm that the intended crew members have joined before beginning the lift.

5. **Check that everyone understands the alerts.** OperatorLink shows STOP, HOLD and SLOW to the jobsite crew. [^1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]

HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [^1]

Explain these differences before the boom moves.

6. **Keep the communication method available throughout the lift.** If using OperatorLink, holding a move button keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it. [^1] Do not assume a previous signal is still arriving. Keep watching the load and the surrounding hazards.

7. **Stop movement if a signal is unclear or communication is interrupted.** Use the agreed stop procedure, establish clear communication again and follow the site's instructions before resuming. Do not guess what an unclear call means or continue moving because a phone screen has not changed.

8. **Keep checking the conditions near the power lines.** Use the site's required clearances and electrical hazard procedures. A communication tool relays signals, but the crew still needs to follow the lift plan and the instructions of the responsible personnel.

9. **Close out the session after the work.** If using OperatorLink, remember that a jobsite link stops working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [^1] [^1] Start a fresh session when needed and share its new link or QR code.

## Tools that can do it

Several communication methods may be considered for hearing STOP and SLOW calls near power lines. The right choice depends on the site, the crew's working positions, the lift plan and the communication method agreed before the lift.

**OperatorLink** is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] Nobody needs to install an app because the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1] Check that phone data coverage is available where the crew will work and that everyone understands how the alerts appear.

**A two-way radio** is another option to consider. Check whether the operator and ground crew can hear each other clearly from their working positions, whether the agreed calls are understood and whether the channel can be used for the lift without confusion. Confirm the backup procedure before the boom approaches power lines.

**A phone video call app** is another option to assess. Check whether the crew can keep the call available during the lift, whether the signal person's position can be seen clearly and whether the operator can receive the required calls while maintaining attention to the work.

**Agreed hand signals** can be considered as part of the site's communication plan. Confirm which signals apply, who will give them and whether the operator can see the signal person from the required position. Check the site's procedures for communication when visibility changes.

Compare the options against the actual working conditions rather than assuming that a phone, radio or visible signal will always be available. Keep the agreed backup ready and do not move the boom if the required communication is unclear.

## Common mistakes to avoid

**Starting without checking communication.** A phone browser needs a working data signal for OperatorLink to pass signals between phones. [^1] Check the connection before the lift and agree on what to do if it drops.

**Assuming every phone alerts in the same way.** On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Check how the alert appears on each phone rather than assuming that everyone will feel it.

**Treating HOLD and SLOW like STOP.** OperatorLink releases held directions and shows a full-screen alert when STOP is pressed. [^1] HOLD and SLOW remain on for everyone until the last person leaves the jobsite. [^1] Make sure the crew understands these different behaviors before work starts.

**Assuming a move signal keeps arriving.** If a move stops arriving for 2 seconds, the other phones drop it. [^1] Confirm the signal is still being sent and stop if communication becomes unclear.

**Reusing an old session without checking it.** An OperatorLink jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours. [^1] [^1] Check the session before the shift and create a fresh one when necessary.

**Relying on a phone as the only way to stop movement.** Keep the site's required communication and emergency procedures in place, and make sure the crew knows what to do if a call is missed or a device becomes unavailable.

## Frequently asked questions

### Can OperatorLink show STOP and SLOW calls on a phone?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] The person who starts the jobsite shares a link or QR code, and crew members join from it. [^1] Agree on a backup method before the boom approaches power lines.

### Does OperatorLink make a phone buzz when STOP is pressed?

On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] The crew should check how the alert appears on each phone before work starts. Do not assume every device will provide a vibration alert. Agree on what the operator and ground crew will do if an alert is missed or a phone becomes unavailable.

### What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently because they stay on for everyone in the jobsite until the last person leaves. [^1] Make sure the crew understands these differences and follows the site's agreed procedure for stopping movement near power lines.

### Can boom truck operators use OperatorLink without installing an app?

OperatorLink runs in a phone browser and does not require an app install. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] The page can also be added to a phone's home screen as a standalone app. [^1] Check browser access and the phone's data signal before the lift.

### How long does an OperatorLink jobsite session last?

An OperatorLink jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] Check the session before each shift and start a new jobsite when needed. The person starting the new session must share its link or QR code with the crew.

### Can the ground crew talk to the operator through OperatorLink?

Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Agree on a backup communication method for the lift in case the call cannot be heard or the connection is interrupted.

### Is OperatorLink free for boom truck operators?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser, where button presses, chat and voice pass between phones. [^1] Before using it near power lines, check the availability of phone data coverage and confirm that the crew understands the alerts and the site's required communication procedures.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
