---
{"title": "How to guide steel into connection points with a crane operator", "description": "For ironworkers: how to guide structural steel into connection points with the crane operator, what to have ready, and the signal tools that can do it.", "url": "https://2dig.com/how-to-guide-structural-steel-into-connection-points-with-the-crane-operator-for-ironworkers/", "date": "2026-10-29"}
---
For ironworkers: how to guide structural steel into connection points with the crane operator, what to have ready, and the signal tools that can do it.

Agree the stop, hold and slow signals with the crane operator before the lift, move the steel only on clear calls, and keep a fallback ready. OperatorLink can show those signals on the crew's phones in a browser. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the load moves, the ironworker guiding the steel and the crane operator need a shared set of signals for stop, hold and slow, agreed for this connection and this lift. Each ironworker on the connection should know which point the steel is landing on and who is calling each move. Check that the lift path is clear and that everyone on the connection can see the load and the crane. If the crew uses OperatorLink, each phone needs a working data signal and a phone browser, because there is nothing to install. [^1] [^1] The person who starts the jobsite session shares a link or QR code, and the rest of the crew joins from it. [^1] A link stops working 12 hours after the first person joins it, and an empty jobsite is wiped after 3 idle hours, so start a fresh session for each shift. [^1] [^1]

## Step by step

1. Confirm the crane operator can see the load and the ironworkers on the connection, and that everyone knows the stop, hold and slow signals before the steel is picked.
2. Move the steel toward the connection point at the agreed speed, with a designated person calling each move so the operator gets one clear instruction at a time.
3. If the crew uses OperatorLink, the person who starts the jobsite shares the link or QR code, and every crew member joins from a phone browser. [^1] [^1]
4. Confirm everyone is in the session before the lift begins, because the signals are shown to the whole jobsite crew. [^1]
5. Press and hold a move button to keep that move going to the other phones. If it stops arriving for 2 seconds, the other phones drop it, so keep the button held while the move continues. [^1]
6. Set HOLD or SLOW as the steel nears the connection point. Both stay on for everyone until the last person leaves the jobsite, so clear them on purpose once the steel is set. [^1]
7. Use quick calls such as Go Ahead, Copy That and All Clear for short replies. They are sent as chat messages. [^1]
8. If the crew needs to talk through the placement, anyone who joins can take part in a voice call run from the phone browser. [^1]
9. If anything looks wrong, press STOP. It releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [^1]
10. At the end of the shift, leave the session when the crew is finished. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app, because the page runs in the browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] A held move keeps going to the other phones, and STOP releases every held direction on every phone. [^1] [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person can keep the load in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can hear the call over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a hand signal or radio ready as a fallback in case a phone loses its data signal.

## Common mistakes to avoid

Relying on one phone for STOP. If that phone loses its data signal, the rest of the crew may not get the signal, so keep a voice or hand option ready. Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and the screen on every phone. [^1] Reusing an old session from an earlier shift. A link stops working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours, so start a new session each shift. [^1] [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, when both signals are cleared. [^1] Not confirming that a move still arrives. If a held move stops arriving for 2 seconds, the other phones drop it. [^1] Starting the lift before the crane operator has confirmed they can see the load. Adding the page to the phone's home screen lets it open as a standalone app, which is worth doing before the lift. [^1]

## Frequently asked questions

### Is OperatorLink free to use for ironworkers?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The crew opens the session from a phone browser, with no app install needed. [^1] Check each phone's data plan before the shift, because the signals pass between phones in a browser and the phones need a working data signal. [^1]

### What does STOP do in OperatorLink during a steel placement?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently: they stay on for everyone in the jobsite and are cleared only when the last person leaves. [^1] After a STOP, have the crew confirm by voice or hand signal that the load is safe before any move starts again.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For each new shift, start a fresh session and share the new link or QR code with the crew, so nobody joins an old session by mistake.

### Do STOP signals buzz phones in OperatorLink on every device?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so check the screen as well as the sound on an iPhone. Before the lift, check the sound and the screen on every phone in the crew, so nobody misses a signal.

### Can OperatorLink be used for voice calls during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a hand signal or a radio ready as a fallback in case a phone loses its data signal during the shift.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
