---
{"title": "How to guide modular units onto foundation piers", "description": "Set a modular unit onto foundation piers with the crane operator: what to ready, the steps, the tools and the mistakes to avoid.", "url": "https://2dig.com/how-to-guide-modular-units-onto-foundation-piers-with-the-crane-operator-for-modular-building-installers/", "date": "2026-10-29"}
---
Set a modular unit onto foundation piers with the crane operator: what to ready, the steps, the tools and the mistakes to avoid.

To guide a modular unit onto foundation piers, the ground crew and the crane operator need the same signal at the same moment, and a phone browser can carry STOP, HOLD and SLOW between them. [^1] The crew joins one jobsite session from a link or QR code, and the operator's phone shows the signals. [^1] STOP gives everyone else a full-screen alert, while HOLD and SLOW stay on until the last person leaves. [^1] [^1] The phones need a working data signal, and a jobsite with nobody in it is wiped after 3 idle hours. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

The operator's phone needs a working browser and a data signal, because the signals pass between phones in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the ground crew joins from it. [^1]

Before the lift, mark the pier locations, check that the piers are level and sized for the unit, and agree with the crane operator on the rigging points and the lift path. Confirm the weather will hold, because strong wind moves the unit in the air. Decide whose phone shows HOLD and SLOW, because those two signals stay on for everyone until the last person leaves the jobsite. [^1] Add the page to the phone's home screen so it opens as a standalone app. [^1]

## Step by step

1. Confirm the site is ready: the piers are set and marked, the unit is rigged, and the path the crane must take is clear.
2. Check each phone has a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [^1]
3. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [^1]
4. That person shares the link or QR code with the ground crew, and each member joins from it. [^1]
5. Confirm every crew member is in the session before the lift begins, so each one sees the same signals. [^1]
6. Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [^1]
7. Position the signal person where both the unit and the piers are in view, and guide the crane to bring the unit over the piers with steady moves: holding a move button keeps sending that move, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while guiding. [^1]
8. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving the unit again. [^1]
9. Lower the unit onto the piers, check it sits level and within the marks, and only tell the crane to release when the unit is seated on the piers.
10. At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready since signals in a browser depend on the phone's data signal.

## Common mistakes to avoid

Relying on one phone for the STOP signal: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [^1] Lowering the unit before the crew confirms it is centered and level over the piers, then raising it again wastes time and puts strain on the rigging. Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [^1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [^1] Letting the phone go to sleep mid-lift; adding the page to the home screen as a standalone app helps the screen stay available. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The signals are shown through a phone browser, so the phone still needs a working data signal for the shift while the unit is guided onto the piers. Check the phone's data plan before relying on it during the lift.

### What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it at once. HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite, so they have to be cleared on purpose before a move.

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. A jobsite with nobody in it is wiped after 3 idle hours. For a fresh shift, start a new session and share the new link or QR code with the crew.

### Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal while guiding the unit onto the piers.

### Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback while guiding the unit.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
