---
{"title": "How to guide equipment onto roofs for mechanical contractors", "description": "Steps for guiding equipment onto a roof with one clear set of signals, what rooftop crews need ready, the tool options, and common mistakes.", "url": "https://2dig.com/how-to-guide-equipment-onto-roofs-for-rooftop-mechanical-contractors/", "date": "2026-11-01"}
---
Steps for guiding equipment onto a roof with one clear set of signals, what rooftop crews need ready, the tool options, and common mistakes.

Guiding equipment onto a roof depends on one set of signals that the whole crew sees at the same time, from the person who runs the equipment to everyone on the roof. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [^1] [^1] The other options are listed below with the checks that apply to each.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the first lift, rooftop mechanical crews need one person who runs the equipment and one person who gives the signals, and each should know who the other is.

Each person on the crew needs a phone with a browser, because OperatorLink runs in a phone browser. [^1] Check that each phone has a working connection and enough charge for the whole job.

Choose the person who will start the jobsite, since that person opens the session and shares the link or QR code with the crew. [^1] Nobody needs to install an app to join. [^1]

Mark the roof area, the drop point and the path the equipment will take, so every person on the crew names the same spots. Agree in advance on which signal means what and who will press STOP.

A jobsite link stops working 12 hours after the first person joins it, so start a fresh session for each shift rather than reusing an old link. [^1]

## Step by step

1. Walk the roof with the whole crew and name the drop point, the path and the spot where the signal person stands, so everyone uses the same words.
2. Have the person who starts the jobsite open the session from a phone browser. [^1]
3. That person shares the link or QR code, and each crew member joins from it. [^1]
4. Before any lift starts, confirm that every crew member is in the session, so each one sees the same signals. [^1]
5. Agree on the signals that stay on. HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [^1]
6. Send STOP, HOLD and SLOW once with nothing moving, so each person sees each one. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] Check how each phone alerts, since on Android browsers signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1]
7. Bring the equipment onto the roof with the signal person calling each move. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it, so keep the button held only while the move is wanted. [^1]
8. Use the one-tap calls for short messages such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [^1]
9. Press STOP at any point the load looks wrong, and wait for the crew to look before moving again. [^1]
10. At the end of the shift, remember that a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app, because the page runs in a browser. [^1] It can also be added to a phone's home screen as a standalone app. [^1]

Anyone who joins can take part in a voice call run from the phone browser. [^1] It is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is another option. No facts here describe one, so check whether the call stays open for the whole shift, whether the signal person can see the roof edge and the load from the call, and whether the phone's screen stays on during the lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain radio words, that every member can be heard over engine and wind noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready, such as a radio or a hand signal, since OperatorLink runs in a phone browser. [^1]

## Common mistakes to avoid

- **Relying on one phone to show STOP.** Keep a voice call or hand signal ready too, so the crew has more than one way to stop the load.
- **Assuming every phone alerts the same way.** On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every phone. [^1]
- **Reusing an old link on a new shift.** A jobsite link stops working 12 hours after the first person joins it. [^1]
- **Leaving the session empty and expecting it to be there the next day.** A jobsite with nobody in it is wiped after 3 idle hours. [^1]
- **Forgetting that HOLD and SLOW stay on.** They stay on for everyone until the last person leaves, so a signal set earlier in the job is still showing. [^1]
- **Not watching for a move that stops arriving.** If a move stops arriving for 2 seconds, the other phones drop it. [^1]
- **Letting a phone's screen go dark during the lift.** Keep the page open on each phone, and add it to the home screen as a standalone app so it is ready to open. [^1]

## Frequently asked questions

### Is OperatorLink free to use for roof work?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The page runs in a phone browser, so each phone on the roof needs a browser that can open the session. [^1] Nothing in this page covers what a paid plan would cost, because none is built yet, so check the current price before you plan a job around it.

### What does STOP do in OperatorLink during a roof lift?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently, because they stay on for everyone in the jobsite until the last person leaves. [^1] Before the lift starts, agree on who will press STOP and what each person does when the alert appears, so the crew knows what to do when it shows.

### How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For each new shift, start a fresh session and share the new link or QR code with the crew, so nobody on the roof opens an old one.

### Does OperatorLink buzz on an iPhone?

On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] iPhone Safari ignores the buzz, so the alert has to be seen on the screen, where STOP shows as a full-screen alert to everyone else. [^1] Check the alert on every iPhone before the lift, and keep a voice or hand signal ready as well.

### Can OperatorLink carry voice during a roof job?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Check that the voice call works on each phone before the lift, and keep a radio or hand signal ready in case a phone cannot be used.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
