---
{"title": "How to demonstrate standardized crane signals to trainees", "description": "A how-to for crane training instructors on demonstrating standardized signal procedures to trainees, with steps, tool options and common mistakes.", "url": "https://2dig.com/how-to-demonstrate-standardized-signal-procedures-to-trainees-for-crane-training-instructors/", "date": "2026-10-22"}
---
A how-to for crane training instructors on demonstrating standardized signal procedures to trainees, with steps, tool options and common mistakes.

Set out the signal set in order, have each trainee give every signal back to you, and keep a second check ready, such as a voice call or radio. OperatorLink is one option that shows STOP, HOLD and SLOW on phones in a browser [^1].

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the first drill, write the signal set your program teaches on a single page, in the order you will demonstrate it, so every trainee works from the same sheet. Decide which instructor gives each signal and which trainee gives it back, so the roles are clear before anyone raises an arm. Pick a training space where trainees can stand at the distance they will work at and still see the signaller clearly. Check the light and the background, because a signal that is hard to read in one spot will be hard to read on a real site.

If you run any part of the demonstration on phones, each phone needs a working browser. A phone browser is enough, with no app install needed [^1]. Check the signal bars on each phone in the room where you will practice, since a dead spot can cut a drill short. The person who starts the session shares a link or QR code, and each trainee joins from it [^1]. Start the session shortly before class, because a link stops working 12 hours after the first person joins it [^1], and an empty session is wiped after 3 idle hours [^1].

## Step by step

1. Write the signal set in order on one page and read it aloud before anyone practices.
2. Demonstrate each signal yourself, slowly, from the position the trainee will stand in, and name it out loud as you give it.
3. Have each trainee give the signal back while you check the arm position, the hand shape and the timing.
4. Start and end every drill with the STOP signal, so trainees treat it as the first signal they must know cold.
5. Run each drill with the operator position and the signal position in place, so trainees see the signal at the distance they will work at.
6. Add a second check, such as a voice call or a radio, and have trainees confirm each signal back to you in words.
7. Vary the load and the position, and ask trainees to hold each signal until you say to change it.
8. Pause after each drill and ask what the trainee saw and what they would do next.
9. Record each trainee's results against the written signal set, not from memory.
10. Close the session by confirming that each trainee gives every signal correctly before they move on.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] [^1]. The person who starts a session shares a link or QR code, and trainees join from it [^1]. HOLD and SLOW stay on for everyone until the last person leaves [^1]. STOP releases every move that was being held on every phone and shows a full-screen alert to everyone else [^1]. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages [^1], and anyone who joins can take part in a voice call run from the browser [^1].

A phone video call app is a second option, and no facts are available here about one. Check whether the instructor can keep the call open through a whole drill, whether trainees can see the signaller's hands clearly, and whether the phone locks its screen mid-drill.

A two-way radio is a third option, and no facts are available here about one. Check that trainees can hear the instructor over machine noise and that the channel stays clear during each drill.

Match the option to the training site and the class size, and keep a fallback ready so no drill stops if a phone drops out.

## Common mistakes to avoid

Using one phone as the only way trainees see a signal. If that phone goes quiet, the drill stops, so keep a hand signal or a voice call as a backup.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and the screen on every device before the first drill [^1].

Reusing last week's link or session. A link stops working 12 hours after the first person joins it [^1], so start a fresh session for each class.

Leaving a session empty between classes and expecting the setup to remain. A session with nobody in it is wiped after 3 idle hours [^1].

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves [^1], so plan how each drill ends.

Assuming a move still reaches every phone without a check. If a move stops arriving for 2 seconds, the other phones drop it [^1], so have trainees confirm each move arrived.

Letting a phone sleep during a drill. Check the screen settings before class, and add the page to the home screen so it opens as a standalone app [^1].

## Frequently asked questions

### Is OperatorLink free to use for crane training?

OperatorLink is currently free to use, and no paid plan is built yet [^1]. It runs in a phone browser with no app install [^1]. Check your training program's own rules for phones before you use it in class, and confirm that every trainee's phone can open the shared link before the first drill starts.

### What does the STOP signal do in OperatorLink?

STOP releases every move that was being held on every phone and shows a full-screen alert to everyone else [^1]. HOLD and SLOW work differently, since they stay on for everyone until the last person leaves [^1]. Trainees should practice reading a STOP alert from the phone they are holding and from a phone across the room, then return to the written signal set.

### How long does an OperatorLink session link stay active?

A link stops working 12 hours after the first person joins it [^1]. A session with nobody in it is wiped after 3 idle hours [^1]. For each class, start the session shortly before the drill and share a fresh link or QR code with trainees, so nobody joins from an old one.

### Do OperatorLink signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz [^1]. iPhone Safari ignores the buzz, so on an iPhone the alert shows on screen and may not be felt. Check the sound and screen settings on every phone before the first drill, so no trainee misses a STOP during practice.

### Can OperatorLink run a voice call during a training drill?

Anyone who joins can take part in a voice call run from the phone browser [^1]. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages [^1]. Use the voice call or the quick calls as a second check, and keep a radio or hand signal ready in case a phone drops out of the drill.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
