---
{"title": "Coordinate Segment Placement With a Gantry Operator", "description": "Learn how launching gantry crews can coordinate segment placement during bridge erection, prepare the crew, agree on signals, and compare communication tools.", "url": "https://2dig.com/how-to-coordinate-segment-placement-with-the-gantry-operator-during-bridge-erection-for-launching-gantry-crews/", "date": "2026-10-31"}
---
Learn how launching gantry crews can coordinate segment placement during bridge erection, prepare the crew, agree on signals, and compare communication tools.

To coordinate segment placement with the gantry operator, agree on the signals, the order of movement, who confirms each stage, and when work must stop. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [^1] Use an agreed communication method, confirm each instruction, and keep a two-way radio or hand signals ready as a fallback for the lift. Agree on the fallback before the lift begins.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [^1] | Currently free to use, and no paid plan is built yet. [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before coordinating segment placement during bridge erection, make sure the launching gantry operator and ground crew agree on the placement sequence, the signals they will use, and who confirms each stage. Identify who watches the segment, who watches its position relative to the structure, and who communicates with the operator. Agree on what STOP, HOLD and SLOW mean for the crew before any movement begins.

If using OperatorLink, the service runs in a phone browser, and button presses, chat and voice pass between phones in the browser. [^1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [^1] Confirm that the gantry operator and the relevant crew members have joined before starting the placement sequence. [^1]

Decide how the crew will confirm instructions and report a change in the segment's position. Agree on the conditions that require STOP and who can call it. Keep the crew's established communication method available as a fallback. OperatorLink can be added to a phone's home screen to open as a standalone app. [^1] A jobsite link stops working 12 hours after the first person joins, and a jobsite with nobody in it is wiped after 3 idle hours. [^1] [^1]

## Step by step

1. Before the shift, agree on the segment placement sequence with the gantry operator and the ground crew. Identify who gives movement instructions, who watches the segment, and who confirms that each stage is complete.

2. Choose the communication method for the lift. Confirm that every crew member understands the agreed signals and knows how to report a problem or call STOP.

3. If using OperatorLink, have the person starting the jobsite open it in a phone browser. No app install is needed. [^1]

4. Share the jobsite link or QR code with the gantry operator and the relevant crew members. Each person joins from it. [^1] Confirm that everyone who needs to receive the signals is present before movement begins. [^1]

5. Confirm the meaning of each signal before placement. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew. [^1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] Make sure the crew understands this behavior before starting.

6. Communicate each movement in the agreed sequence. With OperatorLink, holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, the other phones drop it. [^1] Confirm that the intended movement is still being received before continuing.

7. Use clear confirmations at each stage. OperatorLink sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1] Agree on how these messages and calls relate to the crew's movement procedure.

8. Stop movement if a STOP instruction is given or the crew cannot confirm the next action. OperatorLink STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] Before resuming, confirm that the crew has checked the situation and agrees on the next step.

9. At the end of placement, confirm that the segment is in the intended position and that the crew has completed the agreed sequence. Do not treat a message or signal alone as proof that the physical placement is complete.

10. At the end of the shift, close out the communication session and agree on the method for the next shift. An empty OperatorLink jobsite is wiped after 3 idle hours, and its link stops working 12 hours after the first person joins. [^1] [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is another option to consider. The available facts do not describe a particular video call app, so check whether a video call works on the jobsite for the whole placement, whether the gantry operator and the signal person can each see the segment clearly on their screen, and how the crew will confirm each movement instruction.

A two-way radio is another option for coordinating spoken instructions. The available facts do not describe a particular radio, so check its coverage at the bridge site, whether the crew can hear messages over machine noise, and how everyone will confirm that an instruction was received.

Direct voice communication, a phone browser session, and an agreed set of hand signals can each form part of a site's communication arrangements. Choose according to the work procedure and the needs of the crew. Do not assume that a message has been received just because it was sent. Agree on a fallback before the lift begins, and make sure everyone knows when to stop and how to confirm that it is safe to resume.

## Common mistakes to avoid

Starting placement before agreeing on the movement sequence can leave the operator and ground crew with different expectations. Confirm the order of work, the person responsible for each instruction, and how the crew will confirm each stage before moving the segment.

Assuming every crew member has joined the communication session can leave someone without the signals. With OperatorLink, the person starting the jobsite shares a link or QR code for the crew to join. [^1] Confirm that the relevant people are present before starting.

Treating a sent movement as proof that it is still being received can cause confusion. In OperatorLink, holding a move button keeps sending that move to the other phones, but if it stops arriving for 2 seconds, they drop it. [^1] Confirm the signal and use the agreed procedure if communication becomes uncertain.

Forgetting how STOP, HOLD and SLOW behave can delay the next decision. STOP releases every held direction on every phone and shows a full-screen alert to everyone else, while HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] [^1] Make sure the crew understands these differences before the lift.

Assuming a phone browser will work without a data signal can leave the crew without its planned communication method. OperatorLink passes button presses, chat and voice between phones in a browser. [^1] Check the connection and keep an agreed fallback ready. Do not rely on an old session for a later shift because jobsite links expire and empty jobsites are cleared. [^1] [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It passes button presses, chat and voice between phones in a browser. [^1] Each phone needs a working data signal for the crew to use this method. Check the connection before starting placement, and agree on a fallback in case the planned communication method becomes unavailable.

### Can OperatorLink help coordinate segment placement with a gantry operator?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] Anyone who joins can take part in a voice call, and one-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Agree on the movement sequence and confirmation procedure before using it during placement.

### What happens when the STOP button is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently because they stay on for everyone in the jobsite until the last person leaves. [^1] The crew should agree on these signal meanings before placement and confirm the situation before resuming movement after a stop.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a later shift, start a fresh jobsite and share its new link or QR code with the crew. Confirm that the gantry operator and the relevant crew members have joined before beginning the placement sequence.

### Can the gantry crew talk through placement using OperatorLink?

Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] The crew should agree on how to confirm instructions and report changing conditions, and keep an established fallback ready if phone communication becomes unavailable.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
