---
{"title": "Coordinate Rigging Cuts With the Operator on Demolition Jobs", "description": "How demolition and wrecking crews can coordinate rigging cuts with the crane operator: what to prepare, the steps, tool choices and common mistakes.", "url": "https://2dig.com/how-to-coordinate-rigging-cuts-with-the-operator-for-demolition-and-wrecking-crews/", "date": "2026-10-21"}
---
How demolition and wrecking crews can coordinate rigging cuts with the crane operator: what to prepare, the steps, tool choices and common mistakes.

Agree on who gives each cut and which signals stop the work before the first pull, and keep a backup way to call a halt. OperatorLink can show the crew's STOP, HOLD and SLOW signals on phones in a browser. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, and no paid plan is built yet [^1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |

## What you need before you start

Before the first cut, the crew needs one named signal person who gives the calls for the rigging, a written order of cuts that the operator has seen, and a plain agreement on who can call a halt.

Every person who may signal needs a phone or radio that works for the whole shift. The operator should know which signals are live and who sends them, so set that down before the lift begins.

If the crew runs its signals in a phone session, each phone needs a working browser and signal, because the signals pass between phones in a browser. [^1]

The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [^1] Before the shift, add the page to each phone's home screen so it opens as a standalone app. [^1]

## Step by step

1. Walk the site with the operator and the rigging foreman, and agree on the order of cuts and the load each cut will release.
2. Name one signal person for each side of the rigging, and make sure the operator knows who that person is.
3. Agree on the signals in plain words before the first cut, including what STOP means and who is allowed to give it.
4. If the crew uses a phone session, have the person who starts it open the session from a phone browser. No app install is needed. [^1]
5. Share the link or QR code with the crew, and confirm that each member has joined before the first cut. [^1]
6. Agree that HOLD and SLOW stay on for everyone until the last person leaves the jobsite, so the crew clears them on purpose. [^1]
7. Before each cut, the signal person gives the call and waits for the operator to confirm it is understood, by voice or radio.
8. Pressing a move button keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it, so keep the button held while the load moves. [^1]
9. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so the whole crew pauses and checks the rigging before anyone moves again. [^1]
10. At the end of the shift, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app, because the page runs in a browser. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A two-way radio is a second option. This page has no source material on that option, so check that every crew member can hear the signal person over the machine noise, and that the channel stays clear for the whole lift.

A phone video call app is a third option. This page has no source material on that option, so check whether the operator can see the signal person's hands the whole time, and whether the phone locks its screen during the lift.

Match the option to the site and the crew, and keep a fallback ready for any stretch when a phone has no signal.

## Common mistakes to avoid

Relying on one phone for the STOP signal. If that phone drops off, the rest of the crew may not get the signal, so keep a voice or hand signal ready.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check sound and screen on every device before the lift. [^1]

Leaving a session empty and expecting it to hold signals the next day. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

Forgetting that HOLD and SLOW stay on until the last person leaves, so the crew has to clear them on purpose. [^1]

Not checking that a move still arrives. Holding a move button keeps that move going to the other phones, and the move is dropped if it stops arriving for 2 seconds. [^1]

Trusting a screen alone in heavy noise, when a plain voice check before the first cut would have confirmed the calls.

## Frequently asked questions

### Is OperatorLink free for demolition crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Because the signals run in a phone browser, check that every phone has a working browser and signal for the whole shift. [^1] Nobody needs to install an app to join a session. [^1] A session is started from a shared link or QR code. [^1]

### What does the STOP button do on OperatorLink?

STOP stops every move that was being held on every phone in the session, and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [^1] Agree before the first cut who may press STOP and what the crew does when the alert appears, so the reaction is not left to chance.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new shift, start a fresh session and share the new link or QR code with the crew, so nobody joins from an old link by mistake.

### Do STOP alerts on OperatorLink buzz every phone?

On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] On an iPhone, the alert may only be seen on the screen, so the crew should check sound and screen on every phone before the lift. Keep a voice call or a hand signal as the backup, so that nobody depends on a buzz alone.

### Can OperatorLink carry voice between crew members?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a radio or hand signal as a fallback for the cut calls, so the crew still has a way to speak if a phone is not working during the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
