---
{"title": "Pile driving: coordinate pile pickups with the crane operator", "description": "Steps, tools and common mistakes for pile driving crews coordinating pile pickups with the crane operator, using phone browser signals.", "url": "https://2dig.com/how-to-coordinate-pile-pickups-with-the-crane-operator-for-pile-driving-crews/", "date": "2026-10-28"}
---
Steps, tools and common mistakes for pile driving crews coordinating pile pickups with the crane operator, using phone browser signals.

Pile pickups run on one shared place for signals: a phone browser session that one person starts and the rest join from a link or QR code. [^1] [^1] A STOP press releases every held direction and throws a full-screen alert in front of the rest of the crew, while HOLD and SLOW stay put for everyone until the jobsite empties. [^1] [^1] On Android browsers signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | STOP, HOLD and SLOW reach the crew, and button presses, chat and voice pass between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Every phone on the pickup needs a browser, because button presses, chat and voice pass between phones in a browser. [^1] Whoever starts the jobsite sends round a link or QR code, and everybody else joins through it. [^1] An empty jobsite keeps nothing: it is wiped after 3 idle hours, so a session left over from the previous shift has to be started again. [^1] Pick the phone that will display HOLD and SLOW, since both stay set for the whole crew until the last person leaves. [^1] Before the first drive, add the page to the home screen so it opens as a standalone app. [^1] Write down the order of pile pickups and the signal that closes each one, so the operator and the ground crew work from the same plan.

## Step by step

1. Walk the crew through the browser requirement, since button presses, chat and voice pass between phones in a browser. [^1]
2. Have the person starting the jobsite open it in a phone browser, with nothing to install. [^1]
3. That person sends the link or QR code round, and each crew member joins through it. [^1]
4. Count heads before the first pickup, so nobody is outside the session when a signal goes out. [^1]
5. Settle which signals latch: HOLD and SLOW hold for everyone in the jobsite and clear only when the last person leaves. [^1]
6. For a pickup, keep a move button held so the move keeps reaching the operator's phone; if it stops arriving for 2 seconds the other phones drop it, so hold through the swing. [^1]
7. Close each step of the pickup with the one-tap radio-style calls, Go Ahead, Copy That and All Clear, which arrive as chat messages. [^1]
8. When STOP is pressed it releases every held direction on every phone and shows a full-screen alert to the rest of the crew, so stop and look before the next move. [^1]
9. When talking beats typing, anyone in the jobsite can take part in a voice call run from the phone browser. [^1]
10. At the end of the shift everyone leaves, and a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. STOP, HOLD and SLOW reach the jobsite crew through it, and button presses, chat and voice pass between phones in a phone browser. [^1] [^1] There is no app to install; the page opens in the browser. [^1] Whoever starts the jobsite hands out a link or QR code, and the crew joins from it. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear arrive as chat messages, and anyone who joins can take part in a voice call. [^1] [^1]

A phone video call app is the second option. Nothing in the facts here describes one, so check whether a call can stay open across a whole shift, whether the signal person's hands stay in frame, and what happens when a phone screen locks partway through a pickup.

A two-way radio is the third option. Nothing in the facts here describes one, so check that plain voice is agreed, that every crew member can be heard over the driving rig and hammer, and that the channel stays clear for the length of a pickup.

Weigh each option against the crew and the site, and keep a fallback ready, since anything running in a browser depends on the phone's data signal.

## Common mistakes to avoid

Leaning on a single phone for the STOP press: if its data signal drops, the rest of the crew misses it, so keep a voice or hand option ready. Expecting every phone to alert alike: signals such as STOP make an Android browser buzz, while iPhone Safari ignores the buzz, so check sound and screen on each device. [^1] Leaving a jobsite empty overnight and expecting the signals to still be there: one with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW hold for everyone until the last person leaves, so somebody has to clear them on purpose. [^1] Letting go of a move button too early: a move that stops arriving for 2 seconds is dropped by the other phones. [^1] Letting a phone sleep mid-pickup. The app can be added to a phone's home screen as a standalone app. [^1]

## Frequently asked questions

### Is OperatorLink free to use for pile driving crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Everything runs through a phone browser. [^1] Check the data plan before the crew leans on it.

### What happens when the STOP button is pressed during a pile pickup?

A STOP press releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it at once. [^1] HOLD and SLOW work the other way: both stay on for everyone until the last person leaves the jobsite. [^1]

### How long does a jobsite link stay active for pile driving?

A jobsite link stops working 12 hours after the first person joins it, so a link kept from an earlier shift may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] Start a new session for a fresh shift and send round the new link or QR code.

### Do STOP signals buzz on every phone in the crew?

Signals such as STOP make the phone buzz in an Android browser. [^1] iPhone Safari ignores the buzz. [^1] Check sound and screen on every phone in the crew before the first pickup so nobody misses it.

### Can crew members talk over the phone during a pile pickup?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
