---
{"title": "How to coordinate outrigger setup with the ground crew", "description": "How mobile crane operators can coordinate outrigger setup with the ground crew: what to have ready, the steps, tool choices and common mistakes.", "url": "https://2dig.com/how-to-coordinate-outrigger-setup-with-the-ground-crew-for-mobile-crane-operators/", "date": "2026-10-21"}
---
How mobile crane operators can coordinate outrigger setup with the ground crew: what to have ready, the steps, tool choices and common mistakes.

Outrigger setup goes best when the operator and the ground crew agree on the signals before anything moves. OperatorLink is one option that shows STOP, HOLD and SLOW to the crew in a phone browser. [^1] Other options, such as a two-way radio, are covered below.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the outriggers come out, the operator and the ground crew should agree on who gives each call, what each signal means on this setup, and where crew members will stand while the outriggers are set. Everyone should know the stop call before the first pad goes down. Each person needs a working way to be heard and to hear, whether that is a radio, hand signals or a phone session. The operator needs the load chart for the planned setup in view, and the signal person needs the site plan showing the pad positions and the ground conditions. If phones are part of the plan, each one needs a working browser and a data signal for the whole job, because the signals pass between phones in a browser. [^1] The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [^1] A session with nobody in it is wiped after 3 idle hours, so open it when the crew gathers rather than ahead of time. [^1]

## Step by step

1. Walk the site with the operator and the signal person before the crane is positioned, and mark where each outrigger pad will go and where people must stay clear.
2. Agree on the signals in use, STOP, HOLD and SLOW, and what each one means for this setup.
3. Agree that any stop call from anyone is obeyed at once, before anyone moves.
4. Confirm every crew member can see and hear the signals. If phones are part of the plan, open the session from a phone browser, since no app install is needed. [^1]
5. Share the link or QR code and confirm every crew member has joined before any outrigger moves. [^1] [^1]
6. Extend the outriggers in the order agreed, with the signal person in view of the operator at all times.
7. Set each pad only on the ground agreed in the walk, and confirm it is seated before the next outrigger moves.
8. Use HOLD whenever the setup must pause. HOLD stays on for everyone until the last person leaves, so clear it only when the crew agrees. [^1]
9. Pressing and holding a move button keeps that move going to the other phones, and if it stops arriving for 2 seconds the other phones drop it, so release the button as soon as the move is done. [^1]
10. Before any lift begins, the signal person confirms the setup with the operator and the crew.
11. When STOP is called, the operator stops at once. STOP releases every held direction on every phone and shows a full-screen alert to everyone else, so the crew checks the setup before moving again. [^1]
12. When the outriggers are retracted, the crew agrees on the order they come in, and everyone leaves the session.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] It runs in a phone browser with no app install. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages, and anyone who joins can take part in a voice call run from the phone browser. [^1] [^1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the alert on each phone. [^1] OperatorLink is currently free to use. [^1]

A phone video call app is a second option. This page has no published details about one, so check whether the call can stay open for the whole setup, whether the signal person stays in view of the operator, and whether the phone's screen stays on during the lift.

A two-way radio is a third option. This page has no published details about one, so check that the crew agrees on plain spoken calls, that every member can be heard over machine noise, and that the channel stays clear through the setup.

Match the option to the crew and the site, and keep a backup ready in every case, since phone-browser signals depend on each phone's data signal.

## Common mistakes to avoid

Starting the setup before every crew member has joined the session or can hear the agreed signals. Check the joining step before the first pad moves.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on each device. [^1]

Leaving HOLD or SLOW on after the reason has passed. Both stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [^1]

Assuming a move is still going after the button is let go. If a held move stops arriving for 2 seconds, the other phones drop it, so confirm the state with the signal person before the next move. [^1]

Relying on one phone for STOP. Keep a voice call or hand signal ready in case a phone's data signal drops.

Reusing an old link from an earlier day. A jobsite link stops working 12 hours after the first person joins it, so start a fresh session for each new setup. [^1]

## Frequently asked questions

### Is OperatorLink free to use for outrigger setup?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Because it runs in a phone browser, each phone still needs a working data signal for the whole setup, so check the phone's data plan before relying on it. Keep a signal person, hand signals or a radio ready as a backup in case a phone drops out during the lift.

### What does a STOP call do in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else, so the crew sees it at once. [^1] HOLD and SLOW work differently: they stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] Crews should agree in advance on which call stops the setup and who may make it, so everyone responds the same way every time.

### How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For each new day or new setup, start a fresh session and share the new link or QR code with the crew, so nobody joins from an old link by mistake.

### Do OperatorLink STOP calls buzz on every phone?

Not on every phone. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Check the sound and screen on every phone before the setup begins, and make sure each crew member can see the full-screen alert that STOP shows. [^1]

### Can the crew talk by voice during OperatorLink outrigger setup?

Anyone who joins the session can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Because the call runs in a phone browser, keep a radio or hand signal ready as a fallback, and confirm each crew member can hear the call over the noise on site.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
