---
{"title": "How to coordinate oversize loading with the crane operator", "description": "Steps for heavy haul and transport crews to coordinate oversize load loading with the crane operator, and what to check first.", "url": "https://2dig.com/how-to-coordinate-loading-of-oversize-loads-with-the-crane-operator-for-heavy-haul-and-transport-crews/", "date": "2026-10-27"}
---
Steps for heavy haul and transport crews to coordinate oversize load loading with the crane operator, and what to check first.

Agree the lift plan and one signal person before the load moves, then confirm that every phone and radio uses the same signals. OperatorLink can show STOP, HOLD and SLOW to the crew in a phone browser. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Heavy haul and transport crews need a plan for the lift before the load moves. Agree on the lift point, the set-down point and the route, and check the permit conditions for the route. Confirm the load details and rigging with the crane operator before the first move, and name the one person who gives the signals. Everyone on the crew should know what each signal means and who has the final call to stop.

If the crew uses a phone session, each phone needs a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [^1] The person who starts the session shares a link or QR code, and the crew joins from it. [^1] A jobsite with nobody in it is wiped after 3 idle hours, so a session from an earlier shift may need to be started again. [^1] Keep a radio or hand signal ready as a fallback in case a phone loses its data signal.

## Step by step

1. Hold a short planning talk with the crane operator and the transport crew before the load is lifted. Agree on the lift point, the set-down point and the route.
2. Agree on the signals and name one signal person who gives them. Hand signals, radio calls and phone signals must all mean the same thing to everyone.
3. If the crew uses phones, check that each one has a working browser and a data signal for the shift. [^1]
4. Open the session from a phone browser. No app install is needed. [^1]
5. Share the link or QR code and confirm that every crew member has joined before the lift starts. [^1] [^1]
6. Agree which signals stay on. HOLD and SLOW stay on for everyone until the last person leaves the jobsite, so decide in advance who clears them. [^1]
7. Move the load one step at a time. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so confirm each move is still showing before the next one. [^1]
8. When STOP is pressed, every held direction is released on every phone and everyone else sees a full-screen alert. Stop, look at the load and confirm the crew is ready before moving again. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1] A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open the session. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person can be seen clearly by the crane operator, and whether the phone locks its screen during a lift.

A two-way radio is a third option. No facts here describe one, so check that every crew member can hear the calls over machine noise, that the crew agrees on the call words in advance, and that the channel stays clear through the whole lift.

Match the option to the crew and the site, and keep a fallback ready, since phone signals depend on the data signal.

## Common mistakes to avoid

Relying on one phone for the STOP signal. If that phone loses its data signal, a signal sent from it may not reach the rest of the crew, so keep a radio or hand signal ready.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the lift. [^1]

Leaving an empty session and expecting it to hold signals the next day. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [^1]

Not confirming that a move still arrives. If a move stops arriving for 2 seconds, the other phones drop it. [^1]

Letting the phone lock its screen during the lift. The page can be added to a phone's home screen as a standalone app, which gives the crew one icon to open. [^1]

## Frequently asked questions

### Is OperatorLink free for heavy haul and transport crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The crew can open it from a phone browser without installing an app. [^1] Because the signals travel over the phone network, check each phone's data plan before the shift, and keep a radio or hand signal ready in case a phone loses its data signal. [^1]

### What does the STOP signal do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW work differently, because they stay on for everyone in the jobsite until the last person leaves. [^1] Before the lift, the crew should agree on who can press STOP and what each person does when the alert appears, so the load stops in a controlled way.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new shift, start a new session and share the new link or QR code with the crew, so everyone joins the current session.

### Do OperatorLink alerts buzz on iPhones?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so an iPhone user may only see the alert on screen. Before the lift, check the sound and screen settings on every phone in the crew, and make sure each person knows what the alert looks like, so nobody misses a STOP signal.

### Can OperatorLink voice calls be used during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback for the whole lift.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
