---
{"title": "Coordinate Heavy Gate and Turbine Lifts Safely", "description": "Prepare the crew, agree on lift signals, and coordinate heavy gate and turbine lifts with the crane operator using clear communication and a planned sequence.", "url": "https://2dig.com/how-to-coordinate-heavy-gate-and-turbine-lifts-with-the-crane-operator-for-dam-and-hydro-construction-crews/", "date": "2026-10-27"}
---
Prepare the crew, agree on lift signals, and coordinate heavy gate and turbine lifts with the crane operator using clear communication and a planned sequence.

To coordinate a heavy gate or turbine lift, agree on the lift sequence, the signal person's role, the movement commands, and the stop procedure before the load leaves its support. Confirm that the crane operator and ground crew can communicate throughout the lift, and decide how the crew will respond if a signal is unclear or communication stops. OperatorLink is one option for showing STOP, HOLD and SLOW and passing button presses, chat and voice between phones in a browser. [^1] Keep the site's established communication methods available as a fallback.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [^1] | Currently free to use, with no paid plan built yet. [^1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
| Agreed hand signals | not published | not published | not published |

## What you need before you start

Before coordinating a heavy gate or turbine lift, have the lift plan, the agreed movement sequence, the assigned roles, and the communication method ready. The crane operator and the ground crew need to know who gives movement signals, who can call STOP, and how the crew will respond if instructions are unclear.

Confirm the planned path, the intended landing position, and the areas that must remain clear. Check the rigging arrangement, lifting points, load information, and crane setup against the approved lift plan. Resolve questions about the load or the planned movement before starting. These checks are part of preparing the lift, not a substitute for following the site's procedures.

Choose a communication method that the operator and signal person can use throughout the lift. Agree on the meaning of each command and how the crew will confirm that an instruction has been received. Decide what happens if a phone loses its data signal, a radio transmission is unclear, or a crew member cannot see or hear the signal.

If using OperatorLink, the crew can see STOP, HOLD and SLOW and exchange button presses, chat and voice through phone browsers. [^1] The person starting the jobsite shares a link or QR code for the crew to join. [^1] OperatorLink runs in a phone browser with no app install. [^1] Agree on a backup communication method before the lift begins.

## Step by step

1. **Review the lift plan.** Confirm the load, lifting points, rigging arrangement, crane position, intended travel path, and landing area with the people responsible for the lift. Resolve any uncertainty before moving the load.

2. **Assign the communication roles.** Identify the signal person and make sure the crane operator knows whose directions to follow under the site's procedures. Agree on who may call STOP and how any conflicting or unclear instructions will be handled.

3. **Agree on the commands.** Review the words, hand signals, or other signals used for the lift. Make sure everyone understands the difference between a movement instruction, a request to hold position, and a stop command. Do not begin until the communication method and the response to an unclear signal are understood.

4. **Check the communication method.** Test the chosen method before the load is lifted. Confirm that the operator and signal person can exchange and acknowledge instructions from their working positions. If using phones, check the data signal and the visibility of the screen. OperatorLink passes button presses, chat and voice between phones in a browser. [^1]

5. **Clear the work area.** Follow the lift plan and site procedures to confirm that the intended path and landing area are ready. Check that people are in their assigned positions and that the crew can communicate without confusion.

6. **Start the lift as planned.** Give the agreed instructions and follow the planned sequence. Keep communication clear and use the site's agreed method to confirm that each instruction is understood. Do not proceed on an unclear or unconfirmed signal.

7. **Control movement and pauses.** Keep the crane operator informed of the next intended movement. If the load needs to pause, use the agreed hold instruction. For OperatorLink, HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [^1] Holding a move button keeps sending that movement to the other phones, but if it stops arriving for 2 seconds, the other phones drop it. [^1] These behaviors should be understood before the crew relies on the tool.

8. **Stop when communication is uncertain.** Use the agreed STOP procedure whenever a signal is unclear or the lift cannot continue as planned. OperatorLink's STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] Follow the site's procedure before resuming movement.

9. **Confirm the landing and finish.** Follow the planned placement sequence and confirm that the load is supported as intended before the lifting equipment is released. After the lift, close out the communication session and review any problems that affected coordination.

## Tools that can do it

The communication method needs to match the lift plan, the work positions, and the conditions at the site. Compare the available options by checking how instructions are passed, how the crew confirms them, and what happens if communication stops.

**OperatorLink** is made by the team that publishes this site, 2Dig. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] No app install is needed to use it in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [^1] It is currently free to use, and no paid plan is built yet. [^1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Check phone visibility, data coverage, and the site's requirements before deciding whether it belongs in the lift communication plan.

**Two-way radio** is another option to consider for passing spoken instructions between the operator and the crew. The available facts here do not establish specific radio features or performance. Check that the chosen radios work at the required positions, that the crew understands the channel and speaking procedure, and that transmissions can be heard over site noise.

**A phone video call app** is another option to assess when the crew needs to communicate by phone. The available facts here do not establish the features of any particular app. Check whether the operator and signal person can communicate from their working positions, whether the screen view is useful for the task, and what happens if the connection drops.

**Agreed hand signals** can be considered as part of the site's established communication procedure. Confirm the signal person's position, the operator's ability to see the signals, and the procedure for stopping if visual contact is lost. The chosen method should follow the approved lift plan and site rules.

Match the tool to the actual work conditions. OperatorLink's jobsite link stops working 12 hours after the first person joins. [^1] Keep the required fallback method ready rather than relying on a single means of communication.

## Common mistakes to avoid

Starting before roles and signals are agreed can leave the operator and ground crew uncertain about whose instruction to follow. Confirm the signal person, the movement commands, and the stop procedure before the lift begins.

Assuming everyone can see or hear the same instruction can cause confusion around large gates, turbine components, and restricted work areas. Check communication from the actual working positions and stop if an instruction is unclear.

Treating a phone signal as proof that every instruction has arrived can create a false sense of certainty. OperatorLink passes button presses, chat and voice between phones in a browser. [^1] Its held movement is dropped on other phones if the move stops arriving for 2 seconds. [^1] Understand this behavior and follow the agreed response if communication is interrupted.

Forgetting that STOP, HOLD and SLOW behave differently can cause the crew to misunderstand the displayed state. OperatorLink's STOP releases every held direction and shows a full-screen alert, while HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [^1] [^1] Explain these differences before use.

Assuming every phone gives the same alert is another avoidable mistake. Android browsers buzz for signals such as STOP, while iPhone Safari ignores the buzz. [^1] Check the screen and alert behavior on the phones being used, and keep the site's backup communication method available.

Finally, do not assume an old jobsite session will remain available indefinitely. OperatorLink links stop working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [^1] [^1] Start a fresh session when needed and make sure the whole crew has joined before work resumes.

## Frequently asked questions

### How should a crane operator and ground crew coordinate a heavy gate lift?

Start with the approved lift plan, assigned roles, the planned movement sequence, and the agreed communication method. Confirm who gives movement instructions and how the crew calls STOP. Check that the signal person and operator can communicate from their working positions. Agree on what happens if a signal is unclear or communication stops, and do not continue until the problem has been resolved.

### Can OperatorLink help coordinate turbine lifts?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [^1] The crew joins from a link or QR code shared by the person who starts the jobsite. [^1] Whether it can be used for a particular turbine lift depends on the lift plan, site procedures, phone coverage, and the communication requirements established by the responsible crew.

### Does OperatorLink need a phone data signal?

Yes. OperatorLink passes button presses, chat and voice between phones through a phone browser. [^1] Check coverage from the positions where the operator and ground crew will work. Agree on a fallback communication method before lifting, and follow the site's procedure if a signal is interrupted.

### What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else in the jobsite. [^1] HOLD and SLOW behave differently because they stay on for everyone until the last person leaves. [^1] The crew should review these behaviors before the lift and follow the agreed stop and restart procedure whenever communication or movement becomes uncertain.

### Does OperatorLink work on iPhone and Android phones?

OperatorLink runs in a phone browser and does not require an app install. [^1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Check the screen and alert behavior on each phone before use. Phone compatibility alone does not establish whether the tool meets a site's communication requirements.

### How long does an OperatorLink jobsite session last?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a later shift, start a new session and share its link or QR code with the crew. Confirm that the required people have joined before using the session for coordination.

### Is OperatorLink free for dam and hydro construction crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The crew can exchange button presses, chat and voice between phones in a browser. [^1] Before choosing it, check the site's communication procedures, phone coverage, and the availability of a suitable fallback method.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
