---
{"title": "Coordinating critical lifts in a reactor building", "description": "Signal handoff, phone setup and tool choices for coordinating critical component lifts inside a reactor building, for nuclear plant lift crews.", "url": "https://2dig.com/how-to-coordinate-critical-component-lifts-inside-a-reactor-building-for-nuclear-plant-lift-crews/", "date": "2026-10-27"}
---
Signal handoff, phone setup and tool choices for coordinating critical component lifts inside a reactor building, for nuclear plant lift crews.

For a critical lift inside a reactor building, the whole crew joins one jobsite session on a phone browser, opened when the person who starts it shares a link or QR code. [^1] [^1] STOP cancels every held direction across all phones and puts a full-screen alert in front of everyone else, while HOLD and SLOW switch on for the crew and clear only when the last person leaves. [^1] [^1] Each phone needs a working data signal through the shift, and a session left empty is erased after 3 idle hours. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and carries button presses, chat and voice between phones in a browser [^1] | Free to use now, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Inside a reactor building, phones with a working browser and a data signal are the base, because the signals travel over the phone network. [^1] The building's layout can hide the signal person from the crane operator's line of sight, so settle before the lift on who gives each signal and from where. The rest of the crew joins when the person who starts the jobsite shares a link or QR code. [^1] A session that sits empty is erased after 3 idle hours, so a stopped-shift session may need to be set up again. [^1] Agree whose phone shows HOLD and SLOW, because both stay on for everyone until the last person leaves. [^1] Pin the page to the phone's home screen so it opens as a standalone app. [^1] Name the voice or hand fallback before the load moves, since the signal rides on the phone's data signal.

## Step by step

1. Confirm who gives each signal and where that person stands before the lift begins, because the signal person needs a clear view of the load and of the operator.
2. Before the lift, check that every phone carries a working browser and a data signal, since the signals travel between phones in a browser. [^1]
3. Have the person who will start the jobsite open the session on a phone browser, with no app to install. [^1]
4. That person sends the link or QR code to the signal person and the rest of the crew, and each member joins from it. [^1]
5. Check that the whole crew is in the session before the load leaves the ground, so every phone shows the same signals. [^1]
6. Decide which signals stay on: HOLD and SLOW hold for everyone in the jobsite and are cleared only when the last person leaves. [^1]
7. Keep a move button held while watching the load, because a move that stops arriving for 2 seconds is dropped by the other phones. [^1]
8. Pressing STOP cancels every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [^1]
9. Agree on the fallback before the load moves, because signals in a browser depend on the phone's data signal.
10. At the end of the lift, have everyone leave the session, and note that a jobsite with nobody in it is erased after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] No app install is needed; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1]

A phone video call app is a second option. With no facts here describing one, check that the crew can keep the call open for the whole lift, that the signal person's hands stay in view, and that the phone does not lock its screen mid-lift.

A two-way radio is a third option. With no facts here describing one, check that both ends agree on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Pick the option that suits the crew and the site, and keep a fallback handy since signals in a browser depend on the phone's data signal.

## Common mistakes to avoid

Depend on a single phone for the STOP signal: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assume every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [^1] Leave an empty session and expect it to still hold signals for the next shift: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forget that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [^1] Go without checking that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [^1] Let the phone go to sleep mid-lift; adding the page to the home screen as a standalone app helps the screen stay available. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is free to use now, and no paid plan is built yet. [^1] The signal is shown through a phone browser, so the phone still needs a working data signal for the shift. Check the phone's data plan before relying on it.

### What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it at once. [^1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [^1]

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a fresh shift, start a new session and share the new link or QR code with the crew. [^1]

### Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal.

### Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
