---
{"title": "How to coordinate antenna lifts with a crane operator", "description": "A practical guide for telecom tower crews coordinating antenna lifts with a crane operator, including preparation, steps, tool choices and common mistakes.", "url": "https://2dig.com/how-to-coordinate-antenna-lifts-with-the-crane-operator-for-telecom-tower-crews/", "date": "2026-10-26"}
---
A practical guide for telecom tower crews coordinating antenna lifts with a crane operator, including preparation, steps, tool choices and common mistakes.

Set the crew's signals before the lift, confirm who gives each movement instruction, and keep the same signals visible to everyone involved. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [^1] | Currently free to use, with no paid plan built yet. [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before an antenna lift, the crane operator and telecom tower crew need a clear way to give, receive and confirm movement instructions. Agree who gives the movement signals and what each signal means before the load leaves the ground. Make sure everyone involved knows how STOP, HOLD and SLOW will be used during the lift.

If a phone-based option is being used, have the phones ready before the lift begins. OperatorLink runs in a phone browser with no app install. [^1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [^1]

For crews using OperatorLink, confirm that every person who needs the signals has joined the same jobsite. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1]

Decide in advance how the crew will handle a STOP, a temporary HOLD and a SLOW instruction. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]

## Step by step

1. **Set the movement language before the lift.** Agree on the signals for starting, stopping, holding and slowing the load. Make sure the crane operator and the tower crew know who is responsible for each instruction.

2. **Choose one main way to communicate.** Use the communication method agreed for the lift, and make sure every person who needs to receive a movement instruction can access it.

3. **Confirm the crew before moving the load.** For OperatorLink, the person who starts the jobsite shares a link or QR code, and each crew member joins from it. [^1] OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1]

4. **Check the STOP response before the antenna moves.** With OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]

5. **Agree how HOLD and SLOW will be used.** With OperatorLink, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]

6. **Keep a movement instruction active while it is needed.** With OperatorLink, holding a move button keeps sending that move to the other phones. If it stops arriving for 2 seconds, the other phones drop it. [^1]

7. **Use short confirmations when useful.** OperatorLink sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages. [^1] Anyone who joins can also take part in a voice call run from the phone browser. [^1]

8. **Stop and reassess whenever the crew needs to change the lift.** With OperatorLink, pressing STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]

9. **Close the jobsite when the lift is finished.** OperatorLink clears HOLD and SLOW when the last person leaves. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

### OperatorLink

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] It runs in a phone browser with no app install. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

### Phone video call app

A phone video call app is another option. No facts here describe one, so check whether the crew can keep the call open for the lift, whether the relevant person stays visible, and whether everyone can recognize the agreed movement signals.

### Two-way radio

A two-way radio is another option. No facts here describe one, so check how the crew will give movement instructions, how confirmations will be handled, and how the crew will respond when the lift needs to stop.

The right choice depends on the communication method already agreed for the lift and what the crew can use consistently. If OperatorLink is used, anyone who joins can take part in a voice call run from the phone browser. [^1]

## Common mistakes to avoid

Do not start the antenna movement before everyone who needs the signals has joined the agreed communication method. With OperatorLink, the person who starts the jobsite shares a link or QR code, and the crew joins from it. [^1]

Do not assume that HOLD and SLOW clear as soon as one person releases them. In OperatorLink, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]

Do not keep treating a move as active after its signal has stopped arriving. With OperatorLink, holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [^1]

Do not assume every phone handles alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1]

Do not leave an empty OperatorLink jobsite expecting it to remain available indefinitely. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Frequently asked questions

### How can OperatorLink coordinate an antenna lift?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] The crew can receive movement signals and communicate by chat or voice through the phone browser. [^1]

### What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW work differently. They stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]

### How does OperatorLink handle a held movement?

Holding a move button keeps sending that move to the other phones. [^1] If the move stops arriving for 2 seconds, the other phones drop it. [^1]

### Can crane crews talk through OperatorLink?

Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] The crew can decide before the lift when to use voice and when to use these short chat messages.

### How long does an OperatorLink jobsite stay available?

An OperatorLink jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] The person starting a later shift should therefore share the current jobsite link or QR code rather than assuming an older link will remain available.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
