---
{"title": "How to confirm load movements by voice for hoist operators", "description": "Confirm load movements by voice for hoist operators: what to have ready, the steps, tool options such as OperatorLink, and common mistakes.", "url": "https://2dig.com/how-to-confirm-load-movements-by-voice-for-hoist-operators/", "date": "2026-10-20"}
---
Confirm load movements by voice for hoist operators: what to have ready, the steps, tool options such as OperatorLink, and common mistakes.

Confirming load movements by voice comes down to a clear call, agreed words, and a crew that can hear each other. OperatorLink can carry a voice call and one-tap calls such as Go Ahead, Copy That and All Clear between phones in a browser. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Passes a voice call and one-tap calls such as Go Ahead, Copy That and All Clear between phones in a browser [^1] [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
| Headset intercom | not published | not published | not published |

## What you need before you start

Before the first lift, the hoist operator and the person giving the calls each need a phone with a working browser and a data signal. OperatorLink runs in a phone browser, so there is no app to install for the shift. [^1] [^1] One person starts the jobsite session and shares a link or QR code with the crew, and each person joins from it. [^1] Check the timing before you start, because a link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open. [^1] A session with nobody in it is wiped after 3 idle hours, so start a fresh session if the crew has been away that long. [^1] Agree on who will take part in the voice call, since anyone who joins can take part. [^1] Agree on the words for each movement, such as Go Ahead, Copy That and All Clear, which are sent as one-tap chat messages. [^1] Add the page to the phone's home screen before the shift so it opens as a standalone app. [^1] Keep a backup method ready for the calls, because any phone can lose its signal.

## Step by step

1. Name the hoist operator and the person who gives the calls, and make sure each knows their role before the lift.
2. Agree on the exact words for each movement, such as go ahead, copy that, slow and all clear, and use them the same way every time.
3. Set up the call on a device everyone can hear, and test it before any load is moved.
4. Before each movement, the caller states the movement and the hoist operator repeats it back.
5. The hoist operator waits for the confirmation before moving the load, and the caller says all clear once the movement is complete.
6. Anyone on the crew can call stop, and the hoist operator stops at once.
7. After the last movement, close the call and end the session so nobody is left on it.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It passes a voice call and one-tap calls such as Go Ahead, Copy That and All Clear between phones in a browser, so the crew can talk through the lift. [^1] [^1] [^1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [^1] Nobody needs to install an app, since the page runs in a browser. [^1]

A phone video call app is a second option. None of the facts for this page describe one, so check whether the call stays open for the whole lift, whether the hoist operator can hear each call over site noise, and whether the phone locks its screen during a lift.

A two-way radio is a third option. None of the facts for this page describe one, so check that every crew member can be heard over machine noise, that the channel stays clear during the lift, and that a radio is ready if a phone fails.

A headset intercom is a fourth option. None of the facts for this page describe one, so check whether the hoist operator can keep working the controls while listening, and whether it reaches the crew at the distance they stand from the load.

Match the option to the crew and the site, and keep a backup ready, since any phone can lose its signal.

## Common mistakes to avoid

Relying on one phone for the calls leaves the crew with no voice if that phone loses its signal, so keep a radio or hand signal ready. Assuming every phone alerts the same way causes missed signals: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on each phone. [^1] Using a session link from an earlier shift is another trap, because a link stops working 12 hours after the first person joins it. [^1] Leaving an empty session in place and expecting it to be ready the next day fails, since a jobsite with nobody in it is wiped after 3 idle hours. [^1] Moving the load before a held move is confirmed is risky, because a held move that stops arriving for 2 seconds is dropped by the other phones, so wait for the repeat. [^1] Skipping a test call before the first lift leaves each person guessing how the call sounds, so test it first.

## Frequently asked questions

### Is OperatorLink free to use for hoist crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The crew uses it through a phone browser, so there is no app to install. [^1] Because the session runs in the browser, each phone still needs a working data signal for the shift, so check the phone's data plan before relying on it. Ask the crew to test the call before the first lift.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new shift, share the link or QR code with the crew again. [^1]

### Can OperatorLink voice calls reach everyone on a hoist crew?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages, so the crew can use both. [^1] Each person still needs to join from the shared link or QR code first. [^1] Confirm before the lift that every person can hear the call.

### Do OperatorLink alerts buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so an iPhone may only show the alert on screen. [^1] Check the sound and screen settings on every phone before the shift, so nobody misses a signal.

### What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently, since they stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] Before the lift, the crew should agree on which signals they will use and how each one will be cleared.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
