---
{"title": "How to confirm clearances before each critical lift", "description": "A plain checklist for plant shutdown coordinators to confirm clearances before each critical component lift, with tool options and common mistakes to avoid.", "url": "https://2dig.com/how-to-confirm-clearances-before-each-critical-component-lift-for-plant-shutdown-coordinators/", "date": "2026-10-26"}
---
A plain checklist for plant shutdown coordinators to confirm clearances before each critical component lift, with tool options and common mistakes to avoid.

Confirm each clearance on the ground before the load moves: the route, the landing area, and every obstruction in the swing, with each check written down and signed off. OperatorLink can carry the STOP, HOLD and SLOW signals to the crew during the lift [^1], but the clearance checks themselves stay with the coordinator and crew.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the first lift, have the lift plan in hand with the load weight, the rigging, the crane position and the planned route for the component. Prepare a check sheet with a line for each clearance, so every obstruction is recorded in one place rather than from memory. Name the lift lead and the person who gives signals to the crane operator, and make sure both have the drawings for the route and the landing area. Know which pipe racks, cable trays, exchangers and overhead lines sit in the swing and the path, and ask the operations team to confirm any live services nearby.

If the crew will use a phone session for signals during the lift, each phone needs a working browser and a data signal [^1]. The person who starts the session shares a link or QR code with the crew [^1], and that link stops working 12 hours after the first person joins [^1]. Start the session on the day of the lift so the link is fresh, because a jobsite with nobody in it is wiped after 3 idle hours [^1].

## Step by step

1. Name the lift lead and the signal person before the plan is final, and confirm each one knows their role.
2. Confirm the lift plan lists the load weight, the rigging, the crane position and the route the load will take.
3. Walk the full route and the landing area with the lift lead. Look up, down and to each side for overhead lines, pipe racks, structure and equipment in the swing.
4. For each obstruction, record the clearance on the check sheet, along with who measured or confirmed it and the time.
5. Confirm that people are out of the load path and the landing area, and that barriers or a watch person are in place.
6. Confirm the crane's swing and boom path with the operator before the first lift, and agree on the signals to be used.
7. If the crew uses a phone session for signals, confirm every phone has joined before the load leaves the ground [^1]. Check that each phone holds its signal for the whole lift.
8. Hold a short briefing and confirm everyone knows who can call STOP and how it will be called.
9. Sign off the check sheet before the load moves, and keep it with the lift paperwork.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [^1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [^1]. HOLD and SLOW stay on for everyone until the last person leaves the jobsite [^1]. It runs in a phone browser with no app install [^1], and the person who starts a jobsite shares a link or QR code for the crew to join from [^1]. The clearance checks in the steps above are still made on the ground by the coordinator and crew.

A phone video call app is a second option. No facts here describe one, so check whether the call can stay open for the whole lift, whether the person giving signals stays in view of the operator, and whether the phone locks its screen during the lift.

A two-way radio is a third option. No facts here describe one, so check that every member of the crew can be heard over the noise at the site, that the channel stays clear through the lift, and that the crew agrees on plain words for each signal.

Match the option to the crew and the site, and keep a fallback ready in case a phone loses its signal.

## Common mistakes to avoid

Treating the phone signals as the clearance check. STOP releases held directions on every phone and shows an alert to everyone else [^1], but the route, the landing area and each obstruction still need to be checked on the ground before the lift.

Relying on one phone to carry STOP. If one phone's data signal drops, the person holding it may miss what is happening, so keep a voice or hand option ready for every crew member.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [^1], so check the screen and sound on each device before the lift.

Using an old link. A jobsite link stops working 12 hours after the first person joins [^1], so a link from an earlier shift may no longer open the session.

Leaving the session empty and expecting it to hold. A jobsite with nobody in it is wiped after 3 idle hours [^1].

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so a hold set earlier can still be on when the crew resumes [^1].

Trusting a move without checking it arrived. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it [^1], so confirm the crew can still see the signal.

Skipping the written record. A check that is not written down cannot be shown afterwards, so sign off each clearance as it is confirmed.

## Frequently asked questions

### Is OperatorLink free to use for plant shutdown crews?

OperatorLink is currently free to use, and no paid plan is built yet [^1]. It runs in a phone browser with no app install [^1], so the crew uses phones with a working browser and a data signal [^1]. Check that each phone's data signal will hold for the whole shift before relying on it, and keep a radio or hand signal ready as well.

### Does OperatorLink check that clearances are safe before a critical lift?

OperatorLink carries STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones [^1]. Clearance checks are made on the ground by the coordinator and crew, using the route walk and check sheet described in the steps above. Those checks happen before the load moves, and each result is signed off and kept with the lift paperwork. Use the phone session for the signals during the lift, once the clearances have been confirmed.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it [^1]. A jobsite with nobody in it is wiped after 3 idle hours [^1]. For a critical lift, start the session on the day of the lift and share the new link or QR code with the crew, so nobody joins from an old link. Confirm everyone has joined before the load leaves the ground.

### Do STOP signals in OperatorLink reach every phone at once?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else [^1]. HOLD and SLOW stay on for everyone until the last person leaves the jobsite [^1]. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [^1], so check the screen and sound on every phone before the lift begins.

### Can the crew talk by voice during a lift with OperatorLink?

Anyone who joins the jobsite can take part in a voice call run from the phone browser [^1]. One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages [^1]. Because these pass between phones in a browser [^1], keep a two-way radio or hand signal as a fallback, and agree in the briefing which one the crew uses if a phone drops out.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
