---
{"title": "Check voice links before a lift for crane safety auditors", "description": "Checking voice links before a lift: what to have ready, a numbered routine, which tools fit, and mistakes to avoid on site.", "url": "https://2dig.com/how-to-check-voice-links-work-before-a-lift-for-crane-safety-auditors/", "date": "2026-10-31"}
---
Checking voice links before a lift: what to have ready, a numbered routine, which tools fit, and mistakes to avoid on site.

Voice links can be checked in a phone browser: the session starts from a link or QR code, and voice runs from the same page. [^1] [^1] [^1] A session with nobody in it is cleared after 3 idle hours, so a check after a quiet gap should begin with a new session. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes taps, written chat and spoken voice between phones in a browser [^1] | Currently free to use; the page publishes no fee for a paid plan, since none has been built [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

An auditor checking voice links before a lift needs a phone with a working browser, since taps, written chat and spoken voice pass between phones in that browser. [^1] Whoever opens the jobsite session passes along a link or QR code, and every other phone enters through it. [^1] A session with nobody in it is wiped after 3 idle hours, so a check made after a quiet gap should begin with a new session. [^1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves, so an auditor should note whether either one is still showing from an earlier check. [^1] The page can be added to a phone's home screen so it opens like an app. [^1]

## Step by step

1. Before the check, make sure each phone can load a web page in its browser, since taps, written chat and spoken voice travel in that browser. [^1]
2. Open the session in a phone browser, which needs no app download. [^1]
3. Send the link or QR code to each phone in the check, and have each person open it. [^1]
4. Before the test signals, check that each phone has entered the session and displays STOP, HOLD and SLOW. [^1]
5. Run one HOLD and one SLOW, then confirm they remain visible on each phone until the last person leaves. [^1]
6. Hold a move button during the check and watch the other phones, since a move that stops arriving for 2 seconds is dropped there. [^1]
7. Press STOP once and check that each other phone shows the full-screen alert and drops any held direction. [^1]
8. When the check ends, everyone leaves, and the empty session clears itself after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. Its signals are STOP, HOLD and SLOW, shown to every phone in the session, with button presses, chat and voice passing between them in a browser. [^1] [^1] No app download is required, because the page runs in the phone's browser. [^1] Entry is by a link or QR code sent out by whoever started the session. [^1]

A phone video call app is a second option. No fee is published for it here, and no facts on this page describe how it works, so check whether the call can stay open through the whole check and whether the screen stays on during a lift.

A two-way radio is a third option. No facts on this page describe one, so ask whether plain voice has been agreed, whether each member can be heard over machine noise, and whether the channel stays clear for the whole lift.

Pick whichever option suits the site, and keep a fallback ready, because the browser option depends on the phone's data signal.

## Common mistakes to avoid

Watching only one phone's screen: during the test, check each phone in turn, so no signal is missed on any device. Assuming every phone alerts alike: Android browsers buzz on signals such as STOP, but iPhone Safari ignores the buzz. [^1] Test the sound and screen on each device before relying on them. Reusing a session left empty overnight: after 3 idle hours with nobody in it, the jobsite is wiped. [^1] Missing a lingering HOLD or SLOW from the last check: both stay up for everyone until the final person leaves. [^1] Assuming a held move reaches every phone without checking: after 2 seconds with no arrivals, the other phones drop it. [^1] Adding the page to the home screen as a standalone app is one way to get back to it quickly. [^1]

## Frequently asked questions

### Does OperatorLink cost anything to use?

At present OperatorLink costs nothing to use, and no paid plan has been built. [^1] Each phone runs the page in its browser, so a voice check depends on the phone's data signal throughout the session. [^1]

### What does a STOP press do on each phone?

A STOP press releases every held direction on each phone and puts a full-screen alert on every other phone. [^1] HOLD and SLOW work differently, since they remain showing for the whole session until the last person leaves. [^1] An auditor checking these should note which signal is still on before ending the check.

### How long does a shared jobsite link keep working?

A jobsite link stops working 12 hours after the first person joins it, so a link used earlier may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a fresh check, start a new session and send the new link or QR code to every phone. [^1]

### Will every phone buzz when STOP is sent?

On Android browsers, STOP and similar signals make the phone buzz, while iPhone Safari ignores the buzz. [^1] An iPhone user therefore has to rely on the on-screen alert, so test the sound and screen view on each handset before the check.

### Can the crew use voice and quick calls during a check?

Anyone who has joined the jobsite can take part in a voice call started from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear go out as chat messages. [^1] Because voice needs a working data signal, keep a radio or hand signal ready as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
