---
{"title": "How to call stop when a machine shifts on slings", "description": "Steps for heavy machinery movers to call stop when a machine shifts on the slings, with what to have ready, tool options and common mistakes.", "url": "https://2dig.com/how-to-call-stop-when-a-machine-shifts-on-the-slings-for-heavy-machinery-movers/", "date": "2026-11-04"}
---
Steps for heavy machinery movers to call stop when a machine shifts on the slings, with what to have ready, tool options and common mistakes.

When a machine shifts on the slings, the person giving signals calls stop and everyone holds still. OperatorLink can pass that call to the crew's phones in a browser, with STOP shown as a full-screen alert to everyone else. [^1] Keep a hand signal or radio ready as a fallback.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before a load is lifted, the crew needs a plan for who calls stop and what that call looks like. Everyone on the team should know the stop call and the hand signal that goes with it, and the person giving signals should be in view of the operator. Heavy machinery movers also need a clear line of sight and an agreed rule that anyone on the crew can call stop at any point in the lift.

If phones are part of the plan, button presses, chat and voice pass between phones in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [^1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]

## Step by step

1. Before the first lift, walk the crew through the stop call and confirm that everyone knows the words and the hand signal.
2. Button presses, chat and voice pass between phones in a browser. [^1]
3. Open the jobsite from a phone browser. No app install is needed. [^1]
4. Share the link or QR code with the crew, and confirm that each member has joined before any load is moved. [^1]
5. When a machine starts to shift, the person calling stop sends STOP. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]
6. Hold all movement until the crew confirms that the load is steady and the next move has been agreed.
7. A move button keeps sending its move to the other phones while it is held. If that move stops arriving for 2 seconds, the other phones drop it, so keep the button held while the move is in progress. [^1]
8. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] Nobody needs to install an app, because the page runs in the browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1]

A phone video call app is a second option. No facts for it are set out on this page, so check whether the call can stay open for the whole lift, whether the operator can see the signal person's hands, and whether the phone's screen stays on during the lift.

A two-way radio is a third option. No facts for it are set out on this page, so check that every crew member can hear the calls over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready in case a phone loses its data signal.

## Common mistakes to avoid

Relying on one voice for the stop call. If the person giving signals cannot be seen or heard, nobody knows to stop, so agree on a second way to call it.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the lift. [^1]

Using an old link. A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open the session. [^1]

Expecting HOLD and SLOW to clear by themselves during the shift. They stay on for everyone until the last person leaves the jobsite. [^1]

Letting a move button go early. Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [^1]

Leaving an empty session open and expecting it to still be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Frequently asked questions

### Is OperatorLink free to use for heavy machinery crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Check the data plan on each phone before relying on it. Costs for the other options on this page are not published here, so check them directly before deciding.

### What does OperatorLink do when STOP is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW work differently, because they stay on for everyone until the last person leaves the jobsite. [^1] Make sure each crew member knows what the full-screen alert looks like before the first lift.

### How long does an OperatorLink jobsite link keep working?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] A jobsite with nobody in it is wiped after 3 idle hours.

### Does OperatorLink make phones buzz when STOP is sent?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so an iPhone may show the alert on screen without any buzz. [^1] Check the sound and screen settings on every phone in the crew before the lift, and make sure each member knows what the full-screen alert looks like.

### Can the crew talk by voice through OperatorLink during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a hand signal or radio as a fallback in case a call drops during the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
