---
{"title": "How to Call STOP When a Load Swings Near People", "description": "Steps for steel fabrication yard crews to call stop when a load swings near people, with tool options and common mistakes.", "url": "https://2dig.com/how-to-call-stop-when-a-load-swings-near-people-for-steel-fabrication-yard-crews/", "date": "2026-11-11"}
---
Steps for steel fabrication yard crews to call stop when a load swings near people, with tool options and common mistakes.

The signal person presses STOP, which stops any move button still being held on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [^1] Button presses, chat and voice pass between phones in a browser. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before a load starts to swing, the crew should agree on how the call will go out and who is allowed to make it. Set up the phone side before the lift begins, not in the middle of it. The signal person needs a phone with a working browser and a data signal, since the signals travel between phones in that browser. [^1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [^1] Decide whose phone shows HOLD and SLOW, because those two signals stay on for everyone until the last person leaves the jobsite. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] The page can also be added to a phone's home screen as a standalone app. [^1] Finally, agree on a fallback such as a voice call or a hand signal, in case the data signal drops.

## Step by step

1. Agree on the exact call for STOP before work starts, and make sure every person on the crew knows the words and who may make the call.
2. Keep the crew out of the swing zone under any load, and make sure the signal person has a clear view of the load path.
3. Test that each person can see or hear the call from where they stand, allowing for yard noise and wind.
4. Begin the lift only after the whole crew has confirmed they received the signal test.
5. When a load begins to swing toward people, call STOP at once, and say the word out loud as well as sending it through any tool in use.
6. Everyone in the path moves clear, and nobody steps back in until the signal person confirms the load is steady.
7. Hold the load in place, check the rigging and the path, and only then give the next move.
8. After the lift, close the session or channel, and write in the shift log what was called and whether the signal got through.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] It runs in a phone browser with no app install, so the crew opens it without installing anything. [^1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen in the middle of a lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice calls, that every member can be heard over machine noise, and that the channel stays clear through the whole lift.

Match the option to the crew and the site, and keep a fallback ready.

## Common mistakes to avoid

Relying on one phone for STOP. Keep a voice or hand option ready as a fallback.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz. [^1] Check the sound and screen on every device, including iPhones, before the lift.

Reusing an old session. A jobsite with nobody in it is wiped after 3 idle hours, so start a fresh session at the beginning of each shift. [^1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [^1]

Treating a held move as safe to continue. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [^1]

Letting a phone sleep during the lift. Check each phone's screen settings before the shift starts.

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Because it runs in a phone browser with no app install, the crew can open it without installing anything. [^1] Check that every phone has a working data signal before the shift starts, and test the setup on the jobsite before relying on it for a lift.

### What does STOP do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently, because they stay on for everyone in the jobsite until the last person leaves. [^1] Crew members should know that HOLD and SLOW stay on until the last person leaves before the lift starts, and the whole crew should practice the call once before the first load moves.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new shift, start a fresh session and share the new link or QR code with the crew, so nobody relies on a link from an earlier shift. The person who starts the jobsite shares that link or code, and the rest of the crew joins from it. [^1]

### Does OperatorLink make phones buzz on iPhones?

On Android browsers, signals such as STOP make the phone buzz. [^1] Check on each phone, including iPhones, whether the alert is seen or heard before the lift starts. Check the sound and screen settings on every phone in the crew before the lift starts, so nobody misses a signal.

### Can OperatorLink carry voice during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a radio or hand signal as a fallback for the lift.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
