---
{"title": "How to Call Slow and Stop During Panel Set", "description": "A practical guide to calling SLOW and STOP during glazing and curtain wall panel set, with setup steps, tool choices and checks.", "url": "https://2dig.com/how-to-call-slow-and-stop-during-panel-set-for-glazing-and-curtain-wall-installers/", "date": "2026-10-25"}
---
A practical guide to calling SLOW and STOP during glazing and curtain wall panel set, with setup steps, tool choices and checks.

During glazing and curtain wall panel set, agree how SLOW, HOLD and STOP will be called and received before movement starts. Check how the crew will communicate, and make sure everyone knows what to do when a signal changes. OperatorLink is one option that shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] It runs in a phone browser without an app install, and the person who starts the jobsite shares a link or QR code for the crew to join. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [^1] | Currently free to use, with no paid plan built yet. [^1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |
| Hand signals | not published | not published | not published |

## What you need before you start

Before setting a glazing panel or curtain wall unit, agree on how the crew will call SLOW, HOLD and STOP, who is giving directions, and what everyone must do when a stop signal is called. Make sure the crane operator, signal person and installers understand the agreed signals before the panel leaves its resting position.



If the crew uses OperatorLink, each person needs a phone browser and a working data signal because button presses, chat and voice pass between phones in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [^1]



Before the lift, check the view of the panel, the path to the installation position, the positions of the installers and the agreed way to stop movement. Confirm that everyone is ready before giving the first movement instruction.

## Step by step

1. **Agree on the signals.** Before lifting, confirm what SLOW, HOLD and STOP mean for the job. Make sure the operator and the crew understand the instructions and know who is authorised to give them. Use the site's agreed signalling method throughout the movement.

2. **Check the communication method.** Confirm that the operator and the people guiding the panel can receive and understand instructions from their working positions. If using phones, check the browser and data signal on each device. OperatorLink passes button presses, chat and voice between phones in a browser. [^1]

3. **Join the same jobsite if using OperatorLink.** The person who starts the jobsite shares a link or QR code, and each crew member joins from it. [^1] Confirm that the intended participants have joined and can see the signals before starting the lift. OperatorLink can be used in a phone browser without installing an app. [^1]

4. **Start the panel movement only when the crew is ready.** Keep communication clear and use the agreed signal for each instruction. With OperatorLink, holding a move button keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it. [^1] Treat any uncertainty about a movement instruction as a reason to pause and confirm it.

5. **Call SLOW as the panel approaches its position.** Use the agreed method to communicate the need for slower movement. With OperatorLink, SLOW stays on for everyone in the jobsite and is cleared when the last person leaves. [^1] Make sure the operator understands the signal and follows the lift plan rather than relying on a screen alone.

6. **Call HOLD when movement needs to pause.** Use the agreed HOLD signal and wait for the crew to confirm the situation before resuming. OperatorLink keeps HOLD on for everyone in the jobsite until the last person leaves. [^1] Do not treat HOLD as a substitute for following the site's lifting procedure.

7. **Call STOP when movement must stop.** With OperatorLink, STOP releases every held direction on every phone and displays a full-screen alert to everyone else. [^1] Follow the agreed stop procedure and do not resume movement until the reason for stopping has been addressed and the appropriate person gives a clear instruction.

8. **Confirm the panel is positioned before finishing.** Keep communication active while the crew completes the agreed placement and securing steps. If a signal is unclear, a phone stops receiving updates or a person cannot see the panel, pause the operation using the agreed procedure. Do not assume that a signal shown on one phone has been received by everyone.

9. **Close out the communication session.** When using OperatorLink, remember that a jobsite with nobody in it is wiped after 3 idle hours. [^1] A jobsite link stops working 12 hours after the first person joins it. [^1] For another shift, check whether a new jobsite session and link are needed.

## Tools that can do it

**OperatorLink**

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Check phone compatibility and keep the site's required backup communication method available.

**Two-way radio**

Before choosing a two-way radio, check coverage across the work area, whether the crew can hear and understand calls over site noise, how the channel is managed, and what the crew will do if a call is missed.

**Phone video call app**

Before choosing a phone video call app, check whether the people involved can see the required views, hear instructions clearly, keep the call available during the lift and recognise a stop instruction without confusion.

**Hand signals**

For hand signals, confirm that the signal person and operator have the required view and understand the signals being used. Check what the crew should do if the operator loses sight of the signal person or an obstruction blocks the view.

**Choosing between options**

Compare each option against the work area, the panel's travel path, the crew's positions and the communication procedure required for the lift. Check the limits of the chosen method and agree on what happens if communication is interrupted. A phone-based tool should not be the only response planned for an unclear or missed instruction.

## Common mistakes to avoid

**Starting before everyone understands the signals.** Confirm the meanings of SLOW, HOLD and STOP before the panel moves. Do not assume that every person interprets a short call or gesture in the same way.

**Using a signal that the operator cannot see or hear.** Check sight lines and communication from the actual work positions. If the panel or surrounding structure blocks the agreed signal, pause and use the site's procedure for restoring clear communication.

**Assuming every phone alerts in the same way.** On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Check how each phone presents the signal before the lift, and make sure the crew knows what to look for on screen.

**Treating HOLD and SLOW as temporary signals in OperatorLink.** Both remain on for everyone in the jobsite and are cleared when the last person leaves. [^1] Make sure the crew understands this behaviour and knows how the session ends.

**Assuming a held movement will keep arriving.** In OperatorLink, if a move stops arriving for 2 seconds, the other phones drop it. [^1] If communication becomes uncertain, follow the agreed stop and confirmation procedure instead of guessing what the operator has received.

**Reusing an old jobsite link without checking it.** An OperatorLink jobsite link stops working 12 hours after the first person joins, and an empty jobsite is wiped after 3 idle hours. [^1] [^1] Check the session before the shift begins and share a fresh link when needed.

**Depending on one communication method without a fallback.** Agree on the response to a lost signal or missed call before lifting begins. Confirm that everyone knows when to stop, how to re-establish communication and who must authorise movement to resume.

## Things to check before you choose

Check that the chosen method works from the operator's position and the locations where installers guide and secure the panel. Confirm that the crew can communicate during the approach, alignment and placement stages, and that everyone understands the same stop procedure.

For OperatorLink, confirm that the phones have working data signals, that all intended crew members have joined the jobsite, and that the browser displays the required signals. [^1] Ask whether the crew needs a standalone home-screen shortcut. OperatorLink can be added to a phone's home screen as a standalone app. [^1]

Check how the crew will identify an incoming STOP signal on each phone, particularly where the phones use different browsers. Agree on a backup method before the lift, and confirm that nobody will resume movement simply because a screen changes or a communication signal returns.

For radios, video call apps and hand signals, verify the particular equipment, service or procedure being considered. The available facts do not establish specific performance, fees or capabilities for those alternatives. Make the choice based on the actual work conditions and the communication procedure required for the lift.

## Frequently asked questions

### How can glazing installers call SLOW during panel set?

Agree on the meaning of SLOW before the lift, identify who gives the signal and confirm how the crane operator will receive it. Use the site's agreed communication method and make sure the signal is clear from the operator's position. OperatorLink shows SLOW to the jobsite crew through phones in a browser, and the signal stays on for everyone until the last person leaves the jobsite. [^1] [^1] Follow the required lifting procedure throughout the movement.

### How does OperatorLink handle STOP during panel set?

OperatorLink releases every held direction on every phone and shows a full-screen alert to everyone else when STOP is pressed. [^1] The crew should agree on the stop procedure before the lift and understand what must happen before movement can resume. Check that the intended crew members have joined the same jobsite and can see the signals. Keep the site's agreed backup communication method available if a signal is unclear or communication is interrupted.

### Can OperatorLink be used without installing an app?

Yes. OperatorLink runs in a phone browser, and no app install is needed. [^1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [^1] Each phone still needs a working data signal for signals, chat and voice to pass between phones in the browser. [^1] Check the devices and browser before relying on the tool during a lift.

### Does OperatorLink make phones buzz when STOP is called?

On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz. [^1] Do not assume every phone will give the same alert. Before the lift, check how each device displays the signal and make sure the crew knows what to watch for. Agree on a backup way to communicate if someone cannot see or recognise the signal, and follow the site's procedure whenever a stop instruction is uncertain.

### How long does an OperatorLink jobsite stay available?

An OperatorLink jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] Before another shift, check whether the previous session is still available and start a new jobsite when needed. Share the current link or QR code with the crew, then confirm that the intended participants have joined before the lift begins.

### Can the glazing crew talk through OperatorLink during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] OperatorLink also sends one-tap radio-style calls such as Go Ahead, Copy That and All Clear as chat messages. [^1] Check that the crew understands how these calls are used alongside the agreed signals. Confirm that the phones have working data signals and keep the site's required backup communication method ready if a call is missed.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
