---
{"title": "How to call hold while checking anchor positions", "description": "Steps to call HOLD while checking anchor positions, with what monument installers need ready, tool options and common mistakes to avoid.", "url": "https://2dig.com/how-to-call-hold-while-checking-anchor-positions-for-monument-installers/", "date": "2026-11-04"}
---
Steps to call HOLD while checking anchor positions, with what monument installers need ready, tool options and common mistakes to avoid.

Call HOLD for the whole crew before anyone steps into the anchor area, and agree in advance how the crew will resume. OperatorLink shows HOLD to the crew and keeps it on until the last person leaves. [^1] [^1] Other tools are not covered by the details on this page, so check them directly before you choose.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, and no paid plan is built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the anchor check starts, the monument installer who will call HOLD needs a phone with a working browser. [^1] The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [^1] Start a fresh session for each day's work, because a link stops working 12 hours after the first person joins it. [^1] An empty session is wiped after 3 idle hours, so a session left unused over a long break may need to be started again. [^1]

Decide which person will call HOLD, and agree on how the crew will confirm they have seen it, such as a short spoken check. HOLD stays on for everyone until the last person leaves, so plan the end of the check before it begins. [^1] The app can also be added to a phone's home screen as a standalone app before the check begins. [^1]

## Step by step

Work through these steps in order, with the plan agreed by everyone on the crew.

1. Agree before the work starts who may call HOLD and how the crew will confirm it.
2. Confirm every crew member is ready and can see or hear the call.
3. Call HOLD before anyone steps into the anchor area, so the whole crew stays still.
4. Check anchor positions one at a time while the rest of the crew holds still.
5. Read each anchor position out loud and confirm it before anyone moves.
6. When the check is finished and the area is clear, resume by the plan agreed in step one, using the way that plan says the hold ends for your tool.
7. At the end of the shift, confirm nobody is still on the call before the crew leaves.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] Nobody needs to install an app to use it, since it runs in a phone browser. [^1] HOLD stays on for everyone in the session until the last person leaves. [^1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it. [^1] One-tap short replies such as go-ahead, copy and all-clear are sent as chat messages. [^1] Anyone who joins can also take part in a voice call run from the phone browser. [^1]

A phone video call app is a second option. No details here describe one, so check whether the call can stay open for the whole check, whether the person calling HOLD stays in view of the crew, and whether the phone locks its screen during the check.

A two-way radio is a third option. No details here describe one, so check that every crew member can hear the call over site noise and that the channel stays clear for the whole check.

Match the option to the site and the crew, and keep a fallback ready, since a phone option depends on a working phone browser. [^1]

## Common mistakes to avoid

Relying on one phone to show HOLD: if that phone drops out, the rest of the crew may not see the call, so keep a spoken or hand check ready as well. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every phone before the check. [^1] Expecting HOLD to clear when the check ends: with OperatorLink, HOLD stays on for everyone until the last person leaves, so the crew has to plan how the hold ends. [^1] Reusing an old link: a link stops working 12 hours after the first person joins it, so a link from an earlier day may not open. [^1] Leaving a session unused over a break: an empty session is wiped after 3 idle hours. [^1] Not checking that the phone stays awake during the check, since a locked screen can hide the signals from the person holding the phone.

## Frequently asked questions

### Does OperatorLink keep HOLD on while anchor positions are checked?

Yes, OperatorLink shows HOLD to everyone in the session, and HOLD stays on for everyone until the last person leaves. [^1] Because of that, the crew should agree before the check on how work resumes, since the hold does not clear when one check ends. Test the crew's phones before the check begins so everyone knows what the screen shows.

### How long does an OperatorLink session stay usable?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier day may not open the session. [^1] A session with nobody in it is wiped after 3 idle hours, so a session left unused over a long break may need to be started again. [^1] Starting a fresh session and sharing its new link or QR code gives the crew a working way in. [^1]

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The app runs in a phone browser, so a working browser and data signal on each phone matter for the whole check. [^1] Check each phone before the check begins, and keep a fallback ready in case a phone loses its signal.

### Does OperatorLink need an app installed on each phone?

No, OperatorLink runs in a phone browser with no app install. [^1] The person who starts the session shares a link or QR code, and the crew joins from it. [^1] Anyone who wants quicker access can add the app to a phone's home screen as a standalone app. [^1]

### Can OperatorLink send voice calls during an anchor check?

Anyone who joins the session can take part in a voice call run from the phone browser. [^1] One-tap short replies such as go-ahead, copy and all-clear are sent as chat messages. [^1] Button presses, chat and voice pass between phones in a browser, so the crew should check that voice works on each phone before the check begins. [^1]

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
