---
{"title": "How culvert and pipe crews call hold when a section swings", "description": "Steps for culvert and pipe installers to call hold when a section swings, with a checklist and the tool options that fit the crew.", "url": "https://2dig.com/how-to-call-hold-when-a-section-swings-for-culvert-and-pipe-installers/", "date": "2026-10-30"}
---
Steps for culvert and pipe installers to call hold when a section swings, with a checklist and the tool options that fit the crew.

To call hold when a section swings, agree on the call and who makes it before the lift, check that every phone has a working browser and data signal, and press HOLD so it stays on for the whole crew until the last person leaves. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
| Hand signals from a signal person | not published | not published | not published |

## What you need before you start

Before a section is lifted into a culvert or pipe run, the crew should agree who calls hold, what the call sounds like, and who must stop when they hear it. Write the hold call on a card or board at the site so everyone can see it. Each member should know who is watching the swing and who is on the rigging.

If the crew uses phones for the call, each phone needs a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [^1] The person who starts the session shares a link or QR code, and the rest of the crew joins from it. [^1] A jobsite link stops working 12 hours after the first person joins it. [^1] A session with nobody in it is wiped after 3 idle hours, so start it at the beginning of the shift. [^1]

Agree in advance that HOLD stays on for everyone in the jobsite until the last person leaves, so nobody is surprised when it is still showing. [^1]

## Step by step

1. Name the signal person and confirm that person can see the section and the rigging.
2. Check that each phone has a working browser. [^1]
3. Open the session from a phone browser. No app install is needed. [^1]
4. Share the link or QR code with the crew and confirm every member has joined. [^1]
5. Walk the section through once with the crew before the lift starts, and confirm everyone can see the signals on their screen.
6. When the section starts to swing, the signal person presses HOLD. HOLD stays on for everyone until the last person leaves. [^1]
7. A move button keeps sending its move to the other phones only while it is held. If the move stops arriving for 2 seconds, the other phones drop it, so keep the button held while the section is being guided. [^1]
8. If the section needs a full stop, press STOP. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]
9. Once the section is secured, the crew leaves the session, and HOLD is cleared when the last person leaves. [^1]

## Tools that can do it

It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app, because the page runs in a browser. [^1] Quick radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1]

A phone video call app is a second option. No facts for this page describe one, so check whether it keeps the call open for the whole shift, whether the signal person can be seen from the rigging position, and whether the phone's screen stays on during the lift.

A two-way radio is a third option. No facts for this page describe one, so check that every member can hear the calls over site noise and that a single channel stays clear through the lift.

Hand signals from a dedicated signal person are a fourth option. No facts for this page describe them, so check that the signal person has a clear view of the section and that every crew member knows the signals before the lift starts.

Match the option to the crew and the site, and keep a fallback ready.

## Common mistakes to avoid

Relying on one phone for the hold call. Phones need a working data signal, because the signals pass between them in a browser, so keep a voice or hand call ready as well. [^1]

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz, so check the sound and screen on every device before the lift. [^1]

Reusing an old link from an earlier shift. A jobsite link stops working 12 hours after the first person joins it, so share a fresh link or QR code for each shift. [^1]

Expecting an empty session to be ready the next morning. A session with nobody in it is wiped after 3 idle hours, so start a new one when the crew returns. [^1]

Forgetting that HOLD stays on until the last person leaves. The crew should agree on that before the lift so no one is caught off guard. [^1]

Letting a move run on without a held button. A move keeps going only while the button is held, and if it stops arriving for 2 seconds, the other phones drop it. [^1]

## Frequently asked questions

### Is OperatorLink free to use for culvert and pipe crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The signals are shown through a phone browser, so each phone needs a working data signal for the whole shift. Check the phone's data plan and signal coverage at the work area before the lift, since the page itself does not change how the signal reaches the phone.

### What does HOLD do when a section swings?

HOLD stays on for everyone in the jobsite until the last person leaves, so the whole crew sees it at once. [^1] STOP works differently. It releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] Agree with the crew before the lift which signal is used for a pause and which is used for a full stop.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A session with nobody in it is wiped after 3 idle hours. [^1] For each new shift, start a fresh session and share the new link or QR code with the crew.

### Does OperatorLink buzz every phone when a signal is sent?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so an iPhone may only show the alert on screen. Check the sound and screen settings on every phone in the crew before the lift, so nobody misses a signal.

### Can OperatorLink handle voice calls for a pipe crew?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Voice depends on the phone's data signal and on how well the crew hears it over site noise, so test it during the walk-through.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
