---
{"title": "How to call hold when a load shifts during a lift", "description": "Learn how mining maintenance crews can call HOLD when a load shifts during a lift, prepare the crew, choose a communication method and avoid common mistakes.", "url": "https://2dig.com/how-to-call-hold-when-a-load-shifts-during-a-lift-for-mining-maintenance-crews/", "date": "2026-10-25"}
---
Learn how mining maintenance crews can call HOLD when a load shifts during a lift, prepare the crew, choose a communication method and avoid common mistakes.

When a load shifts during a lift, call HOLD clearly and make sure the crew understands that movement must pause while the load is assessed. Agree on the signal method before the lift, and do not resume until the load is stable and the crew is ready. OperatorLink shows HOLD to the jobsite crew through a phone browser, with button presses, chat and voice passed between phones. [^1] [^1] The person who starts the jobsite shares a link or QR code for the crew to join. [^1] HOLD stays on for everyone in the jobsite and is cleared when the last person leaves. [^1] Check phone coverage before relying on browser-based signals. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [^1] | Currently free to use, and no paid plan is built yet. [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before a mining maintenance lift, agree on who can call HOLD, how the crew will hear or see the call, and what must happen before movement resumes. Check the load path, the planned movement and the agreed way to stop work if the load shifts. Make sure each crew member knows how to contact the signal person and how to raise a concern if the load starts moving unexpectedly. If OperatorLink is the chosen method, each phone needs a working browser. Button presses, chat and voice pass between phones in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [^1] HOLD stays on for everyone in the jobsite until the last person leaves. [^1] A jobsite with nobody in it is wiped after 3 idle hours, so a new session may be needed after a long pause. [^1] The page can be added to a phone's home screen to open as a standalone app. [^1] Keep an agreed backup signal method ready in case a phone or connection cannot be used.

## Step by step

1. Before lifting starts, agree on the word or signal that means HOLD and confirm who is authorised to call it. Make sure everyone knows that a change in load position means movement must pause while the situation is assessed.
2. Check the agreed communication method with the crew before the load leaves its resting position. If using OperatorLink, check phone coverage and make sure each phone has a working browser. Button presses, chat and voice pass between phones in a browser. [^1]
3. If using OperatorLink, have the person starting the jobsite open it in a phone browser. No app install is needed. [^1]
4. The person who starts the jobsite shares its link or QR code, and crew members join from it. [^1]
5. Confirm the crew understands how HOLD will be called, who will respond, and how the lift will remain stopped while the load is checked.
6. If the load shifts, call HOLD using the agreed method. With OperatorLink, HOLD stays on for everyone in the jobsite and is cleared when the last person leaves. [^1] Do not resume movement until the load has been assessed and the crew has agreed it is safe to continue.
7. If OperatorLink is being used and a move button is held, the move continues to be sent to the other phones. If it stops arriving for 2 seconds, the other phones drop it. [^1] Do not treat the absence of a signal as permission to move.
8. When the load is stable, confirm that the crew is ready and that the reason for the HOLD call has been resolved before giving a fresh movement instruction.
9. With OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] Use the agreed stop procedure if work needs to stop immediately.
10. At the end of the shift, have everyone leave the OperatorLink jobsite. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] HOLD stays on for everyone in the jobsite and is cleared when the last person leaves. [^1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is another option. The available facts do not describe a particular app, so check whether it lets the crew communicate clearly during the lift, whether the load and signal person can be seen when needed, and whether the call remains available while the phone is being used on site.

A two-way radio is another option. The available facts do not describe a particular radio, so check its range at the worksite, whether crew members can hear each other over machine noise, and how the crew will confirm that a HOLD call has been understood.

A direct voice call between crew members is another possibility. Check whether everyone who needs to take part can join, whether instructions can be heard clearly, and what backup method will be used if the call drops.

Compare the available methods against the site's communication needs and keep a backup ready. Button presses, chat and voice pass between phones in a browser. [^1] Check phone coverage before relying on browser-based signals.

## Common mistakes to avoid

Starting a lift without agreeing on the HOLD call can leave crew members unsure when to stop movement. Agree on the signal, who can give it, and what confirmation is needed before lifting begins. Relying on a phone-based method without checking phone coverage can interrupt communication. OperatorLink passes button presses, chat and voice between phones in a browser. [^1] Assuming every phone alerts the same way is another risk: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] Leaving an empty OperatorLink jobsite and expecting it to remain available indefinitely can cause problems because it is wiped after 3 idle hours. [^1] Forgetting that HOLD stays on for everyone until the last person leaves can leave the signal active longer than intended. [^1] Not checking whether a movement instruction is still arriving matters too: if a move stops arriving for 2 seconds, the other phones drop it. [^1] Before the lift, consider adding the page to the phone's home screen so it opens as a standalone app. [^1] Always confirm that the crew understands the call and has an agreed backup method.

## Frequently asked questions

### Is OperatorLink free for mining maintenance crews?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser, with button presses, chat and voice passed between phones. [^1] Each phone still needs a working data signal for the shift. Check the site's phone coverage and the crew's backup communication method before relying on browser-based signals.

### What happens when the HOLD button is pressed during a lift?

HOLD stays on for everyone in the jobsite and is cleared when the last person leaves. [^1] The crew should assess the shifted load and confirm that movement can safely resume before giving a new movement instruction. STOP is different: it releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a fresh shift, start a new jobsite and share its link or QR code with the crew. [^1]

### Does OperatorLink make every phone buzz when a signal is sent?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz. [^1] Check how alerts appear on every phone before the lift and agree on a backup way to communicate if someone does not notice an alert.

### Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Button presses, chat and voice pass between phones in a browser. [^1] Agree on a backup method before the lift in case the call cannot be used.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
