---
{"title": "How to assign who gives signals during a pick for lift planners", "description": "For lift planners: how to name who gives signals during a pick, with the steps, tool choices and mistakes to avoid.", "url": "https://2dig.com/how-to-assign-who-gives-signals-during-a-pick-for-lift-planners/", "date": "2026-10-30"}
---
For lift planners: how to name who gives signals during a pick, with the steps, tool choices and mistakes to avoid.

A pick stays under control when the lift plan names one person to give the signals and everyone else on the crew knows who that is. The assigned signal person gives STOP, HOLD and SLOW, and in OperatorLink the crew can see those signals on phones in a browser, with someone sharing a link or QR code. [^1] [^1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else, while HOLD and SLOW stay on for everyone until the last person leaves. [^1] [^1] Before the lift, confirm phones have a working data signal, and remember that iPhone Safari does not buzz on alert and an idle session is wiped after 3 hours. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

For a lift planner, the first decision is how many signal persons a pick needs and where each one stands. Check that every signal person can see the operator and the load from their spot, or the assignment fails before the crane moves. If the pick uses OperatorLink, it runs in a phone browser with no app install, and the person who starts a jobsite shares a link or QR code for the crew to join. [^1] [^1] Every crew member needs a phone with a working browser and a data signal, because the signals travel over the phone network. [^1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] Before the lift, add the page to the phone's home screen so it opens as a standalone app. [^1]

## Step by step

1. Review the written lift plan and write down who gives the signals, who is the backup, and who takes the STOP call.
2. Judge how many signal persons the pick needs, based on the operator's sight of the load and the distance between pick and place.
3. Name one person as the signal person for the pick and tell the rest of the crew their name and their spot, so nobody assumes the wrong role.
4. Confirm the signal person's position lets them see both the load and the operator for every part of the lift.
5. Agree on the signals to use, whether hand, voice or screen, and rehearse them with the crew before rigging starts.
6. If the crew uses OperatorLink, have the signal person start the jobsite from a phone browser with no app install, and share the link or QR code so each member joins from it. [^1] [^1]
7. Confirm every crew member is in the session before the lift, so each one sees the same signals. [^1]
8. Agree which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and clear only when the last person leaves. [^1]
9. Tell the signal person that holding a move button keeps sending that move, and if it stops arriving for 2 seconds the other phones drop it, so keep it held while checking the load. [^1]
10. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]
11. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1]

No facts here describe a phone video call app, so check whether the crew can keep the call open for the whole shift, whether the assigned signal person's hands stay in view, and whether the phone locks its screen mid-lift.

No facts here describe a two-way radio, so check that the crew agrees on plain voice signals, that every member can be heard over machine noise, and that the channel stays clear through the pick.

Match the option to the crew and the site, and keep a fallback ready since signals through a browser depend on the phone's data signal.

## Common mistakes to avoid

Naming a signal person who cannot see the load or the operator, so make sure the signal person can see the load and operator for every part of the pick. Relying on one phone for the STOP signal: check how STOP appears on each phone before the lift, and keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [^1] Forgetting that a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [^1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [^1] Letting the signal person's phone go to sleep mid-lift; the page can be added to the home screen as a standalone app. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The signals are shown through a phone browser, so check that each phone has a working data signal before the lift. Check the phone's data plan before relying on it.

### How does a lift planner assign who gives the signals?

Name one person as the signal person in the written lift plan, tell the rest of the crew who it is, and confirm that person can see the load and the operator for every part of the pick. If the crew uses OperatorLink, the signal person starts the jobsite and shares the link or QR code so everyone joins from it. [^1]

### What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [^1]

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. After the jobsite has been wiped, share a fresh link or QR code with the crew. [^1]

### Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz. [^1] Check how alerts work on each phone in the crew before the lift so nobody misses the signal. [^1]

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
