2Dig Plain comparisons of crane signalling and jobsite communication tools

GroupTalk vs Motorola Solutions WAVE PTX

GroupTalk and Motorola Solutions WAVE PTX compared with OperatorLink for crane crews: what each does, its prices, jobsite setup and how to choose.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

This page sets out what each tool does for a crane crew, what each one's sources say it does and costs, how each is set up on a jobsite, and which tool fits which need.

OptionOwn feeCard fee
GroupTalkFree 14-day trial [1]not published
Motorola Solutions WAVE PTXnot publishednot published
OperatorLinkFree to use; no paid plan is built yet [2]not published

The short answer

A crane crew member needs signals and calls to reach the whole crew while the crane moves. GroupTalk describes a cloud-based PTT system (push-to-talk) that it says offers unlimited range and secure communication [3]. It also says its group voice channels allow simultaneous communication across multiple teams [3]. Motorola Solutions says its SafetyCam combines video, voice and an AI-powered wearable to protect staff and boost productivity [4]. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [2].

So the facts gathered here cover voice across teams for GroupTalk and video and wearable safety for Motorola Solutions, while OperatorLink's approved claims cover stop, hold and slow signals. None of the rival facts gathered here describe a stop signal, so a crew that needs one should check each rival directly.

What GroupTalk and Motorola Solutions WAVE PTX are built for

GroupTalk's page describes its cloud-based PTT system as offering unlimited range and secure communication [3]. The same page says group voice channels allow simultaneous communication across multiple teams [3]. GroupTalk also offers a free 14-day trial [1].

Motorola Solutions says its SafetyCam combines video, voice and an AI-powered wearable to protect staff and boost productivity [4]. Its page also says it provides managed and support services for keeping customers' technology secure and up to date [4]. Its role-based AI is described as delivering timely insights when they matter most [4].

The facts gathered for this page do not say how either tool passes a stop signal, holds a direction or places a call on a jobsite, so this page does not say what either does for those jobs. A crew that needs those should ask each vendor how its system works on a site before relying on it.

What OperatorLink is built for

OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [2]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [2]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [2]. Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it [2]. One-tap messages such as Go Ahead, Copy That and All Clear are sent as chat [2]. Anyone who joins can take part in a voice call run from the phone browser [2].

Pricing and fees

GroupTalk offers a free 14-day trial [1]. The facts gathered for this page do not give a GroupTalk price after that trial, so that price is not published here.

The facts gathered for Motorola Solutions WAVE PTX give no price, so its price is not published here. OperatorLink is currently free to use, and no paid plan is built yet [2].

The card fee is not published for any option on this page, so a crew that expects to pay a card fee should ask each provider for it before choosing.

Setting it up on a jobsite

OperatorLink runs in a phone browser with no app install [2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [2]. A phone can add the app to its home screen as a standalone app [2]. A jobsite link stops working 12 hours after the first person joins it [2], and a jobsite with nobody in it is wiped after 3 idle hours [2]. Button presses, chat and voice pass between phones in the browser [2].

GroupTalk describes a cloud-based PTT system [3], but the facts gathered here do not say how a crew is added to it or how a jobsite is started.

Motorola Solutions says it provides managed and support services for keeping customers' technology secure and up to date [4]. The facts gathered here do not describe how a crew joins its tools, so the crew should confirm setup with each vendor before a shift.

Things to check before you choose

Does your crew need voice that runs across several teams at once? GroupTalk's page describes group voice channels for that [3].

Does your crew need a stop that reaches every phone? OperatorLink's approved claims describe a STOP that releases every held direction and shows a full-screen alert to everyone else [2].

Which phones does the crew use? On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so check whether a buzz alert matters for your crew [2].

What will each tool cost after its trial, and what card fee applies? GroupTalk offers a free 14-day trial [1]. The facts gathered for Motorola Solutions WAVE PTX give no price, and OperatorLink is currently free to use [2].

Which signals does the crew need on a jobsite, and how will you test that each tool passes them before a lift?

How to choose

If the crew needs voice that runs across several teams at once, GroupTalk's page describes group voice channels for that [3]. If the crew needs video and an AI-powered wearable for staff safety, Motorola Solutions says its SafetyCam combines those [4]. If the crew needs a stop that reaches every phone, OperatorLink's claims describe a STOP that releases every held direction and shows a full-screen alert to everyone else [2]. If the crew needs HOLD and SLOW to stay on until the last person leaves, OperatorLink's claims describe that as well [2]. If the crew wants a free start, GroupTalk offers a free 14-day trial [1], and OperatorLink is currently free to use with no paid plan built yet [2]. A crew with more than one of these needs should check each option against all of them, because no single source here covers every need.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet [2]. The sources cited on this page give no other price, and no card fee is published for it. Prices can change, so confirm the current terms with the product before a shift. Check the terms again before a crew depends on the tool for a whole job.

Does GroupTalk offer a free trial?

GroupTalk offers a free 14-day trial [1]. The facts gathered for this page do not give a GroupTalk price after that trial, so that price is not published here. Check GroupTalk's pricing directly before choosing a paid option for a crew. Ask about card fees as well, since none are published on this page for any option.

Does Motorola Solutions WAVE PTX publish its prices?

The facts gathered for this page give no Motorola Solutions WAVE PTX price, so this page does not publish one. The Motorola Solutions facts gathered here describe managed and support services for keeping customers' technology secure and up to date, and they give no price [4]. Ask the vendor for its prices and card fees before comparing them with the other options on this page.

Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install [2]. A phone can add it to its home screen as a standalone app [2]. On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [2]. A crew with iPhones should check whether the on-screen alert is enough for its needs.

How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it [2]. A jobsite with nobody in it is wiped after 3 idle hours [2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [2]. If a shift runs past that time, ask the product how a crew gets a fresh link before the shift starts.

OperatorLink is currently free to use, and no paid plan is built yet. [2]

Try OperatorLink

Sources

  1. GroupTalk, grouptalk.com, read 2026-10-08
  2. OperatorLink's own description of itself (the product of this site's publisher)
  3. GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08
  4. Motorola Solutions WAVE PTX, motorolasolutions.com, read 2026-10-17

Related comparisons