2Dig Plain comparisons of crane signalling and jobsite communication tools

Push-to-talk apps for subsea installation engineers working with crane crews

Compares push-to-talk tools for subsea installation engineers working with crane crews, with prices, device details and what each tool holds on screen.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

OperatorLink shows STOP, HOLD and SLOW to a crew in a phone browser. [1] It is free to use, and no paid plan is built yet. [1] Peak PTT's radio is priced at $229 with a $19.95 activation fee, and its core service is $24.95 per month per radio. [2][3] Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [4]

OptionUp-front costMonthly costDevice and join
OperatorLinkFree to use; no paid plan is built yet [1]Free [1]Phone browser with no app install; crew joins from a shared link or QR code [1][1]
ZelloFree 14-day trial, no credit card required [4]From $8.00 per user per month, or $6.80 with an annual subscription [4]Runs on iOS, Android, Windows and Mac [5]; joining not published
VoxerFree for individuals [6]; 14-day free trial [7]not publishednot published
GroupTalkFree 14-day trial [8]not publishedDevice list not published; private cloud or on-premises deployment options [8]
Peak PTT$229 per radio plus $19.95 activation fee [2]$24.95 per month per radio [3]Radio hardware; voice travels over AT&T's nationwide LTE network [2]; joining not published

What subsea installation engineers need from push-to-talk apps for crane crews

Subsea installation engineers plan and guide equipment as it is lowered, positioned and landed on the seabed, and much of that work is done from a vessel where a crane lifts the load. The crane operator often cannot see the load or the seabed, so calls and direction signals carry the lift. Offshore work can happen where phone coverage is weak, so a crew should check coverage on the actual site before relying on any tool. Gloves, wind and engine noise make small buttons hard to press and voices hard to hear, which means a signal has to stay clearly visible. Engineers also need a direction to stay on screen until every person on the crew has seen it, because a missed call can stall a lift mid-move. Crews change at short notice, so joining quickly matters as much as the signal itself.

OperatorLink for subsea installation engineers

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew. [1] It passes button presses, chat and voice between phones in a browser. [1] It runs in a phone browser with no app install, and it can be added to a phone's home screen as a standalone app. [1][1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] A jobsite link stops working 12 hours after the first person joins it. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Zello for subsea installation engineers

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [4] Zello offers a free 14-day trial with no credit card required. [4] Zello runs on iOS, Android, Windows and Mac. [5] Ask Zello how a direction such as STOP would show on each phone in the crew before relying on it.

Voxer for subsea installation engineers

Voxer is free for individuals. [6] Voxer offers a 14-day free trial. [7] Ask Voxer which devices it supports and what its paid plans cost per user, because those details are not set out here.

GroupTalk for subsea installation engineers

GroupTalk offers a free 14-day trial. [8] The page offers both a free trial and a sales contact. [9] GroupTalk offers private cloud and on-premises deployment options. [8] Ask GroupTalk for its per-user pricing and device list, since those are not set out here.

Peak PTT for subsea installation engineers

Peak PTT's product is a 4G LTE push-to-talk radio. [2] The radio is priced at $229, with a $19.95 activation fee and $24.95 per month, and the page states there are no contracts. [2] Core radio service is priced at $24.95 per month per radio. [3] Voice travels over AT&T's nationwide LTE network. [2] A crew that is not already carrying radios should first decide whether a radio is the right tool for the job.

Matching the tool to the job

Signals that stay on screen suit lifts where a stop or hold must remain visible to everyone on the crew. OperatorLink keeps HOLD and SLOW on for everyone until the last person leaves. [1] A STOP shows a full-screen alert on every other phone. [1] Crews that need a quick reply without typing can use one-tap calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] A team that mixes iOS, Android, Windows and Mac devices can look at Zello, which runs on all four. [5] Teams that want to test a tool before paying can compare Zello's free 14-day trial with no credit card required [4] and GroupTalk's free 14-day trial. [8] A crew that wants a dedicated radio on a cellular network can look at Peak PTT, whose voice travels over AT&T's nationwide LTE network. [2] A crew that wants its push-to-talk on its own infrastructure can ask GroupTalk about private cloud or on-premises options. [8] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A short job can use OperatorLink's jobsite link, which stops working 12 hours after the first person joins. [1]

Questions to ask before you choose

Does a direction stay on every screen until the crew is finished with it, or does it clear the moment a finger lifts? Can a new person join from a link at the start of a shift, or does someone have to set up accounts first? What happens to a signal when a phone drops its connection for a few seconds? Which phones does each tool run on, and does the crew already carry them? Is coverage strong enough on the deck, in the water and on the seabed where the work happens? Is the price per user, per radio or per month, and does an annual plan change it? How long does a free trial run, and what must be shared to start one? Orion and Microsoft Teams Walkie Talkie are not covered by facts on this page, so ask each one how it handles signals, coverage and price.

Frequently asked questions

Can OperatorLink show STOP, HOLD and SLOW to a crane crew?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Ask each tool how long a direction stays on screen before the crew relies on it.

Is OperatorLink free for subsea installation engineers?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1]

Is Zello free for a subsea crew to try?

Zello offers a free 14-day trial with no credit card required. [4] Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [4] Zello runs on iOS, Android, Windows and Mac. [5] Check that every person on the crew has one of those devices before the trial starts.

What does Peak PTT cost per month?

Peak PTT's core radio service is priced at $24.95 per month per radio. [3] Its radio is priced at $229, with a $19.95 activation fee, and the page states there are no contracts. [2] Voice travels over AT&T's nationwide LTE network. [2] Ask Peak PTT whether its radio suits the crew's job, and check the monthly cost against the number of radios the crew needs.

Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install. [1] It can be added to a phone's home screen as a standalone app. [1] On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz. [1] On an iPhone, the full-screen alert that STOP shows every other phone is the signal to watch, since the buzz will not sound. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
  3. Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
  4. Zello, zello.com/pricing, read 2026-10-08
  5. Zello, zello.com, read 2026-10-08
  6. Voxer, voxer.com/plans-and-pricing, read 2026-10-08
  7. Voxer, voxer.com/business, read 2026-10-08
  8. GroupTalk, grouptalk.com, read 2026-10-08
  9. GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08

Related comparisons