Push-to-talk apps for crane crews for shipyard riggers in 2026
Compare push-to-talk apps for shipyard riggers on crane crews: OperatorLink, Zello, GroupTalk, Peak PTT and TASSTA, by price and devices.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Shipyard riggers working around crane lifts need voice and direction signals that stay in view until the whole crew has them. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser [1]. HOLD and SLOW stay on until the last person leaves, and STOP releases every held direction on every phone with a full-screen alert [1][1]. OperatorLink is currently free to use, and no paid plan is built yet [1].
| Option | Up-front cost | Monthly cost | Device and join |
|---|---|---|---|
| OperatorLink | Free; no paid plan is built yet [1] | Free [1] | Phone browser, no app install; crew joins from a shared link or QR code [1][1] |
| Zello | Free 14-day trial, no credit card required [2] | $8.00 per user per month, or $6.80 with annual subscription [2] | iOS, Android, Windows, and Mac [3] |
| GroupTalk | Free 14-day trial [4] | Not published | Not published |
| Peak PTT | $229 per radio plus $19.95 activation fee [5] | $24.95 per month per radio for unlimited push-to-talk [6] | Radio hardware [5]; voice sent over AT&T's nationwide LTE network [5] |
| TASSTA | Not published | Not published | Smartphones, radios, tablets, and PCs under a bring-your-own-device model [7] |
What shipyard riggers need from push-to-talk apps for crane crews
A shipyard rigger attaches and guides loads around a crane, often where the operator in the cab cannot see the load. Yards are noisy and crowded, so a rigger may be out of earshot of the signal person or the cab. A missed call can stop a lift partway through. The tools a rigging crew needs pass a direction to every person at once and hold it visible until each person has registered it. Voice matters for checking in, but a direction should not depend on the next spoken sentence being heard. Riggers usually wear gloves and keep their eyes on the load, so large buttons and clear alerts count. A crew should compare how each tool passes a direction, how long it stays up, who can join, what each person must do to start, and whether the tool works across the parts of the yard where the crew works.
OperatorLink for shipyard riggers
OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install [1]. It passes button presses, chat and voice between phones in a browser [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it [1]. One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages [1]. Anyone who joins can take part in a voice call run from the phone browser [1]. OperatorLink is currently free to use, and no paid plan is built yet [1].
Zello for shipyard riggers
Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. Zello runs on iOS, Android, Windows, and Mac [3]. Because the price is per user, a crew should count how many people will carry it before comparing the total with other options.
GroupTalk for shipyard riggers
GroupTalk offers a free 14-day trial [4]. GroupTalk also offers the option to run its software on a company's own servers [4]. NCC, Entry, Veidekke, and YIT are named as construction companies that have chosen GroupTalk [8]. The sources here say little more about its devices or per-user prices, so a rigging crew should ask GroupTalk directly.
Peak PTT for shipyard riggers
Peak PTT's PTT-84G is a 4G LTE push-to-talk radio [5]. It is priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts [5]. Voice is sent over AT&T's nationwide LTE network [5]. Peak PTT describes its service as having sub-300-millisecond latency and no dead zones [5].
TASSTA for shipyard riggers
TASSTA describes its core capabilities as instant, secure, real-time coordination [7]. It supports smartphones, radios, tablets, and PCs under a bring-your-own-device model, which means crews use devices they already own [7]. TASSTA applications run on Amazon Web Services, Microsoft Azure, Alibaba Cloud and Google Cloud [7].
Matching the tool to the job
Holding a direction until every person registers it suits a rigger guiding a load, and OperatorLink keeps HOLD and SLOW on for everyone until the last person leaves [1]. A rigger who must halt a lift can use the full-screen STOP alert that OperatorLink shows on every other phone [1]. A rigger who needs to check in between lifts can send Go Ahead, Copy That or All Clear as one-tap chat messages [1]. Anyone who joins can also take part in a voice call run from the phone browser [1]. A yard crew that wants a per-person price can look at Zello Work, which costs $8.00 per user per month, or $6.80 with an annual subscription [2]. A crew that prefers one radio per person with a set monthly price can compare the PTT-84G at $229 per radio, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk [5]. A rigger who wants to test a tool first can use GroupTalk's free 14-day trial [4]. For a short job, OperatorLink's shared link or QR code lets the crew join, and the link works for 12 hours after the first person joins [1][1].
Questions to ask before you choose
Does a direction stay on every phone until each person has it, or does it clear when a finger lifts? Can a rigger join from a link, or must a manager set up accounts and groups first? What happens to a signal when a phone loses connection for a few seconds? Which devices does each rigger already carry, and can the tool run on them? Is coverage enough for the parts of the yard where the crew works? Who pays, and is the price per user, per radio or per month? How long does a free trial last, and what must be shared to start one? Can the tool keep separate groups running at once, so the rigging crew and the crane crew do not talk over each other? Ask Orion and Microsoft Teams Walkie Talkie the same questions before comparing them with the rest.
Frequently asked questions
Can OperatorLink show STOP, HOLD and SLOW to a shipyard rigging crew?
Yes. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser [1]. HOLD and SLOW stay on for everyone until the last person leaves, and STOP releases every held direction on every phone with a full-screen alert [1][1]. Before a lift starts, have every rigger open the shared link and confirm the signals show on their screen.
Is OperatorLink free for shipyard riggers?
OperatorLink is currently free to use, and no paid plan is built yet [1]. Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. Peak PTT's PTT-84G radio is priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk [5]. Compare these totals against how many riggers will carry a phone or radio.
Can a shipyard rigger join OperatorLink without installing an app?
No install is needed. OperatorLink runs in a phone browser with no app install, and the crew joins from a shared link or QR code [1][1]. A jobsite link stops working 12 hours after the first person joins it [1], so check that the link is still live before a later shift.
Do OperatorLink alerts buzz on an iPhone?
On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [1]. STOP also shows a full-screen alert to everyone else [1], so an iPhone user should watch the screen as well as the phone.
Which push-to-talk tools run on Windows and Mac as well as phones?
Zello runs on iOS, Android, Windows, and Mac [3]. TASSTA supports smartphones, radios, tablets, and PCs under a bring-your-own-device model, which means crews use devices they already own [7]. OperatorLink runs in a phone browser, and button presses, chat and voice pass between phones in that browser [1]. Check which devices each rigger carries before you choose, since each tool's device list comes from its own page.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
- OperatorLink's own description of itself (the product of this site's publisher)
- Zello, zello.com/pricing, read 2026-10-08
- Zello, zello.com, read 2026-10-08
- GroupTalk, grouptalk.com, read 2026-10-08
- Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
- Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
- TASSTA, tassta.com, read 2026-10-10
- GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08
Related comparisons
- Push-to-talk apps for crane crews compared (2026)
- Push-to-talk apps for aircraft recovery crane crews
- Push-to-talk apps for crane crews for apprentice riggers
- Push-to-talk apps for boom truck crane crews in 2026
- Push-to-talk apps for bridge construction crane crews
- Push-to-talk apps for crane crews on bridge inspection jobs
- Push-to-talk apps for bulk material handlers on cranes compared
- Push-to-talk Apps for Concrete Pump Crews in 2026
- PTT apps for crane crews for construction foremen
- Push-to-talk Apps for Crane Crews in 2026