Push-to-talk apps for crane crews for nuclear plant lift crews in 2026
Push-to-talk apps for crane crews compared for nuclear plant lift crews: OperatorLink, Zello, Voxer, GroupTalk, Peak PTT, and ESChat.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Push-to-talk apps for nuclear plant lift crews compared: OperatorLink shows STOP, HOLD and SLOW to the jobsite crew, while Zello, Voxer, GroupTalk, Peak PTT and ESChat are each described by their own sources as covering voice and related features.
| Option | Up-front cost | Monthly cost | Device and join |
|---|---|---|---|
| OperatorLink | Free, no paid plan built yet [1] | Free [1] | Phone browser, no app install; crew joins from a shared link or QR code [1][1] |
| Zello | Free 14-day trial, no credit card required [2] | From $8.00 per user per month, $6.80 with annual subscription [2] | Runs on iOS, Android, Windows, and Mac [3] |
| Voxer | Personal plan free [4]; 14-day business trial [5] | Not published | Not published |
| GroupTalk | 14-day free trial [6] | Not published | Private cloud or on-premises deployment [6] |
| Peak PTT | $229 per radio plus $19.95 activation fee [7] | $24.95 per month per radio for unlimited nationwide push-to-talk [8] | LTE radio hardware [7] |
| ESChat | Free 30-day trial [9] | Cloud hosted service $5.99 per user per month [10] | Smartphone and IoT devices [9] |
What nuclear plant lift crews need from push-to-talk apps for crane crews
Nuclear plant lift crews move heavy components through containment buildings, turbine halls, fuel handling areas and maintenance shops, where clearances are tight and access zones are controlled. A signal person gives the operator direction for moves that cannot be seen from the cab, and a rigger attaches and guides loads. Crew members often work in different rooms or levels and can lose sight of one another. A missed call can stop a lift at a critical point. The tools these crews need carry direction signals and hold them steady until every person on the crew has registered them. Voice matters for checking in, but direction signals need to stay visible rather than depend on the next sentence. Crew members keep gloves on and eyes on the load, so the tool needs large buttons and clear alerts. A crew should compare how each tool passes a signal, how long a signal stays up, who can join, what each person must do to get started, and whether the tool reaches the zones where the crew works inside the plant.
OperatorLink for nuclear plant lift crews
OperatorLink is made by the team that publishes this site. It runs in a phone browser, so no app install is needed. [1] It passes button presses, chat and voice between phones in a browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
Zello for nuclear plant lift crews
Zello runs on iOS, Android, Windows, and Mac. [3] Zello offers a free 14-day trial with no credit card required. [2] Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2]
Voxer for nuclear plant lift crews
Voxer's Personal plan is free. [4] Voxer offers a 14-day free trial for business. [5] Voxer integrates with Procore contacts to create groups. [11] Beyond these points the facts say little more, so a crane crew should ask Voxer directly what devices it supports and what its paid plans cost per user.
GroupTalk for nuclear plant lift crews
GroupTalk offers a free 14-day trial. [6] GroupTalk also offers private cloud and on-premises deployment. [6] Personal alarms report incidents immediately to nearby colleagues and central management. [12]
Peak PTT for nuclear plant lift crews
Peak PTT is push-to-talk radio hardware rather than a phone app. The PTT-84G is priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts. [7] Core radio service is priced at $24.95 per month per radio for unlimited nationwide push-to-talk. [8] Peak PTT's toll-free number is 855-600-6161. [7]
ESChat for nuclear plant lift crews
ESChat service is available for under $6.00 per month. [9] ESChat Secure Group Multimedia Messaging is included in the cloud hosted service. [10] ESChat commercial customers receive a 10% discount on annual cloud hosted service. [10]
Matching the tool to the job
Direction signals that stay visible until every person registers them suit the signaller's job: HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] A full-screen STOP alert on every phone gives a signal person a clear way to halt a lift. [1] A rigger who needs to check in can send one-tap radio-style replies without typing. [1] A worker in a controlled access area who is out of sight can use GroupTalk's personal alarm to alert nearby colleagues and central management. [12] For voice check-ins between lifts, Zello Work is priced per user per month, with a discount for annual subscriptions. [2] For a crew on radio hardware already, Peak PTT charges a flat monthly rate per radio. [8] A crew that needs its own data handling can ask GroupTalk about private cloud or on-premises deployment. [6] For a short job, OperatorLink shares a link or QR code the crew joins from, and the link works for 12 hours. [1][1]
Questions to ask before you choose
Does a direction stay on every screen until each person confirms it, or does it clear the moment a finger lifts? Can a crew member join from a link, or does a manager need to set up accounts and groups first? What happens to a signal when a phone loses connection for a few seconds? On which devices can each person receive the tool, and are they the phones the crew already carries? Is the coverage enough for the areas inside the plant where the crew works? Who pays, and is the price per user, per radio, or per month, and does it change on an annual plan? How long does a free trial run, and what must be shared to start one? If a lone rigger needs an alarm, does the tool have one, and who does it reach?
Frequently asked questions
Can OperatorLink hold a STOP that everyone on a nuclear plant lift crew sees?
Some tools keep a direction visible rather than drop it when a finger lifts. OperatorLink keeps STOP, HOLD and SLOW on for everyone in the jobsite and clears them when the last person leaves, and STOP releases every held direction and shows a full-screen alert to everyone else. [1][1] For other tools, ask how long a direction stays on screen and whether it clears when a person stops holding it.
Is there a free push-to-talk app for a nuclear plant lift crew?
Yes. OperatorLink is currently free to use, and no paid plan is built yet. [1] Voxer's Personal plan is free. [4] GroupTalk offers a free 14-day trial. [6] Compare how long a signal stays visible before relying on any free option.
What does push-to-talk cost per month?
Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2] Peak PTT charges $24.95 per month per radio for unlimited nationwide push-to-talk, on top of a $229 per-radio price and a $19.95 activation fee. [8][7] ESChat service is available for under $6.00 per month, with a 10% discount for commercial customers on annual cloud hosted service. [9][10] OperatorLink is currently free, with no paid plan built yet. [1] Voxer pricing is not published here, so ask what it charges per user.
What device is needed for push-to-talk on a crane crew?
OperatorLink runs in a phone browser with no app install and can be added to a phone's home screen. [1][1] Zello runs on iOS, Android, Windows, and Mac. [3] Peak PTT uses a dedicated LTE radio rather than a phone. [7] Check which devices the rest of the crew already carries before the crew relies on one.
Do push-to-talk apps work for crane signals on a phone?
A push-to-talk tool carries voice, and some also pass direction signals. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser; HOLD and SLOW stay on until the last person leaves, and STOP releases every held direction with a full-screen alert. [1][1][1] Ask each provider how far its tools reach on the site before relying on one.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
- OperatorLink's own description of itself (the product of this site's publisher)
- Zello, zello.com/pricing, read 2026-10-08
- Zello, zello.com, read 2026-10-08
- Voxer, voxer.com/plans-and-pricing, read 2026-10-08
- Voxer, voxer.com/business, read 2026-10-08
- GroupTalk, grouptalk.com, read 2026-10-08
- Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
- Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
- ESChat, eschat.com, read 2026-10-10
- ESChat, eschat.com/pricing, read 2026-10-10
- Voxer, voxer.com/construction, read 2026-10-08
- GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08
Related comparisons
- Push-to-talk apps for crane crews compared (2026)
- Push-to-talk apps for aircraft recovery crane crews
- Push-to-talk apps for crane crews for apprentice riggers
- Push-to-talk apps for boom truck crane crews in 2026
- Push-to-talk apps for bridge construction crane crews
- Push-to-talk apps for crane crews on bridge inspection jobs
- Push-to-talk apps for bulk material handlers on cranes compared
- Push-to-talk Apps for Concrete Pump Crews in 2026
- PTT apps for crane crews for construction foremen
- Push-to-talk Apps for Crane Crews in 2026