2Dig Plain comparisons of crane signalling and jobsite communication tools

Push-to-talk apps for mobile crane operators in 2026

Compare push-to-talk apps for mobile crane operators: OperatorLink, Zello, GroupTalk, Peak PTT, ESChat and Relay, with prices and how each crew joins.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

OperatorLink shows STOP, HOLD and SLOW to a crew in a phone browser, and it is currently free to use [1][1]. Prices and devices for each option are listed below, so compare those before you choose.

OptionUp-front costMonthly costDevice and join
OperatorLinkFree, no paid plan built yet [1]Free [1]Phone browser, no app install [1]; crew joins from a shared link or QR code [1]
ZelloFree 14-day trial, no credit card required [2]$8.00 per user per month, or $6.80 with an annual subscription [2]Runs on iOS, Android, Windows, and Mac [3]
GroupTalkFree 14-day trial [4]Not publishedPrivate cloud or on-premises deployment [4]
Peak PTT$229 per radio plus $19.95 activation fee [5]$24.95 per month per radio [6]Transmits voice over AT&T's nationwide LTE network [5]
ESChatFree 30-day trial [7]$5.99 per user per month [8]Push-to-talk for smartphone and IoT devices [7]
RelayNot publishedNot published4G/5G and WiFi connectivity [9]

What mobile crane operators need from push-to-talk apps for crane crews

A mobile crane operator sits in the cab and often cannot see the whole load, the ground, or every person working near it. A signal person or rigger may stand where the operator cannot see, so the operator depends on what reaches the cab. A direction that disappears from the screen, or that a crew member misses, can leave a lift stopped in the middle of a move. The tool needs to show a direction clearly and keep it visible until the people who must act on it have seen it. Operators usually keep their attention on the controls and the load, so large buttons and clear alerts matter more than long menus. Voice matters for checking in, but a stop should not depend on the next sentence being heard. Compare how each tool shows a direction, how long it stays up, who can join, what each person must do to start, and whether the phones or radios the crew already carries can run it.

OperatorLink for mobile crane operators

OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install [1]. It passes button presses, chat and voice between phones in a browser [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it [1]. One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages [1]. Anyone who joins can take part in a voice call run from the phone browser [1]. OperatorLink is currently free to use, and no paid plan is built yet [1].

Zello for mobile crane operators

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. Zello Work subscriptions can be changed or cancelled at any time without penalty [2]. Zello is free for first responders [3]. A crew that does not include first responders should check the terms of that offer before relying on it. Ask Zello which phones and devices a crane crew would use with its app, and how a crew member joins a group.

GroupTalk for mobile crane operators

GroupTalk offers a free 14-day trial [4]. The page offers a free trial and a sales contact, so a crew can start a trial or ask sales directly [10]. Personal alarms report incidents immediately to nearby colleagues and central management [10]. Ask GroupTalk how a crew joins a group, what a mobile crane operator's phone needs to run the app, and how the monthly price is set.

Peak PTT for mobile crane operators

The PTT-84G is a 4G LTE push-to-talk radio, priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts [5]. The radios include access to a GPS Tracking Portal with 90-day location history, geofencing, and real-time crew visibility [5]. Both radios are backed by a lifetime hardware warranty with active service [5]. Check whether the crew needs one radio for each person, and whether the operator's cab and the crew's belts have room for them.

ESChat for mobile crane operators

ESChat offers a free 30-day trial [7]. Its Cloud Hosted service costs $5.99 per user per month [8]. Its annual fee per RoIP or SDK Gateway Connection is $125 per year [8]. Ask ESChat what a RoIP or SDK Gateway Connection covers for your crew before budgeting for it, and which phones the crew would use.

Relay for mobile crane operators

Relay provides nationwide coverage with multi-carrier cellular and WiFi connectivity, requiring no infrastructure investment [9]. Relay provides 7-day support and regular software updates [9]. Relay offers workplace safety features including panic alerts, location visibility, and emergency escalation options [9]. Ask Relay what its devices cost and what a crew must buy before comparing it with the other options here.

Matching the tool to the job

An operator who needs a stop on every crew phone at once can use OperatorLink's STOP, which releases every held direction and shows a full-screen alert to everyone else [1]. A signal person who holds a move button keeps that move on the other phones, and the move drops if it stops arriving for 2 seconds [1]. Short confirmations such as Copy That or All Clear can go as one-tap chat messages [1]. For a crew that compares per-user pricing, Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. For a crew that wants radios with location tracking, the Peak PTT radios include a GPS Tracking Portal with 90-day location history and real-time crew visibility [5]. A rigger who works alone can use GroupTalk's personal alarm, which reports incidents immediately to nearby colleagues and central management [10]. For a short job, OperatorLink's link or QR code lets the crew join, and the link stops working 12 hours after the first person joins [1][1].

Questions to ask before you choose

Does a direction stay on every screen until each person clears it, or does it disappear when the signal person lifts a finger? Does the stop stay visible on the operator's phone when the screen dims or the phone is locked? How long does a direction stay on screen, and can the operator see it without looking away from the load? Is the price per user, per radio, or per month, and does an annual plan change it? How long does a free trial run, and what must be shared to start one? Does the crew's phone or radio reach every part of the site where the lift happens, or are there spots where it drops? If a rigger works alone, does the tool send an alarm, and who receives it? Can the tool run more than one group at once, so the signal crew and the rigging crew do not talk over each other?

Frequently asked questions

Can OperatorLink show crane signals on a phone?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser, with no app install [1][1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on until the last person leaves the jobsite [1]. Before a lift begins, check that the signals show on the phones the operator and signal person will use.

Is there a free push-to-talk app for mobile crane operators?

OperatorLink is currently free to use, and no paid plan is built yet [1]. Zello is free for first responders [3]. ESChat offers a free 30-day trial [7]. GroupTalk offers a free 14-day trial [4]. Check what a free trial asks for before you start one, and check the price when it ends.

What does push-to-talk cost per month for a mobile crane crew?

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. ESChat's Cloud Hosted service costs $5.99 per user per month [8]. Peak PTT's core radio service is $24.95 per month per radio, on top of a $229 radio price and a $19.95 activation fee [6][5]. OperatorLink is currently free to use [1]. Ask GroupTalk for its monthly price before comparing it.

Can a mobile crane operator see a STOP sent from a signal person?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else in OperatorLink [1]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it [1]. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [1]. Test the alert on the phones the operator and signal person will use before the first lift.

How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. For a longer job, check how a crew rejoins once a link has stopped working.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Zello, zello.com/pricing, read 2026-10-08
  3. Zello, zello.com, read 2026-10-08
  4. GroupTalk, grouptalk.com, read 2026-10-08
  5. Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
  6. Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
  7. ESChat, eschat.com, read 2026-10-10
  8. ESChat, eschat.com/pricing, read 2026-10-10
  9. Relay, relaypro.com/pricing, read 2026-10-10
  10. GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08

Related comparisons