2Dig Plain comparisons of crane signalling and jobsite communication tools

Push-to-talk apps for crane crews for ironworkers in 2026

Compare push-to-talk apps for crane crews from an ironworker's view: direction signals, calls, phone or radio needs, prices and questions to ask.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Ironworkers on a crane crew need direction signals that stay visible until everyone has them, calls that reach the whole crew, and a setup that works on the phones and radios the crew already carries. The four options below differ on those points, and the table sets out what each one publishes about cost and devices.

OptionUp-front costMonthly costDevice and join
OperatorLinkFree, no paid plan built yet [1]Free [1]Phone browser, no app install; crew joins from a shared link or QR code [1][1]
ZelloFree 14-day trial, no credit card required [2]From $8.00 per user per month, or $6.80 with annual subscription [2]Runs on iOS, Android, Windows, and Mac; joining not published [3]
Peak PTT$229 for the PTT-84G radio plus $19.95 activation fee [4]$24.95 per month for unlimited push-to-talk, with no contracts [4]Radio hardware; voice over AT&T's nationwide LTE network; joining not published [4][4]
GroupTalkFree 14-day trial [5]Not publishedPrivate cloud or on-premises deployment; joining not published [5]

What ironworkers need from push-to-talk apps for crane crews

Ironworkers on a crane crew connect steel, set members and hook up loads, and much of that work happens high on a structure or on the far side of a lift from the operator. Someone on the steel or on the ground usually has to give the operator a direction, and that direction has to be seen or heard before the load moves. A crew may have ironworkers in several spots, so one person's call can be missed by another who is busy with a bolt or a beam. Gloves, noise and moving equipment make small buttons and quiet alerts hard to use. Ironworkers need a tool that makes a direction obvious on every screen, keeps it on until the crew has taken it in, and gives a clear way to stop. They also need to know whether the tool works on the phones the crew already has, how long a link or signal lasts, and whether one person can raise an alarm for the rest. Price and coverage matter too, because a tool that is not on every phone does not help the whole crew.

OperatorLink for ironworkers

OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install [1], and it can be added to a phone's home screen as a standalone app [1]. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser [1][1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite until the last person leaves [1]. OperatorLink is currently free to use, and no paid plan is built yet [1].

Zello for ironworkers

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. Zello runs on iOS, Android, Windows, and Mac [3]. Zello Enterprise Server can be deployed on-premise [3].

Peak PTT for ironworkers

Peak PTT's PTT-84G is a 4G LTE push-to-talk radio priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts [4]. Peak PTT says both of its radios are backed by a lifetime hardware warranty with an active service plan [4]. Peak PTT supports multiple simultaneous talk groups on one platform [4].

GroupTalk for ironworkers

GroupTalk offers a free 14-day trial [5]. GroupTalk's page says lone workers can alert nearby colleagues and central resources immediately [6].

Matching the tool to the job

Ironworkers who act as signal persons need a direction to stay visible until the crew has it. OperatorLink keeps HOLD and SLOW on for everyone until the last person leaves [1], and STOP shows a full-screen alert on every other phone [1]. An ironworker who must check in with the crew between moves can send one-tap radio-style replies such as Copy That [1]. A short job can use a shared link or QR code, and that link stops working 12 hours after the first person joins it [1]. An ironworker working apart from the crew can look at GroupTalk, whose page says lone workers can alert nearby colleagues and central resources immediately [6]. A crew with mixed phones can check Zello, which runs on iOS, Android, Windows, and Mac [3]. A crew that wants dedicated radio hardware can compare Peak PTT, whose PTT-84G is priced at $229 [4].

Questions to ask before you choose

Does a direction stay on every phone until the crew has it, or does it clear the moment a finger lifts? Can a crew member join from a link without setting anything up first? Which phones does each tool run on, and do all the crew carry those phones? What happens to a signal or a call when a phone loses connection for a few seconds? How does a lone ironworker raise an alarm, and who receives it? Does a free trial need a card, a company email or a sales conversation before it starts? What does each tool cost per user, per radio, or per month, and does an annual plan change that? Does the coverage reach every part of the site where the crew works?

Frequently asked questions

Is OperatorLink free for ironworkers on a crane crew?

OperatorLink is currently free to use, and no paid plan is built yet [1]. A crew joins from a link or QR code that the person starting the jobsite shares [1]. The link stops working 12 hours after the first person joins it [1], and a jobsite with nobody in it is wiped after 3 idle hours [1]. Check those timings against how long the crew will work on the same lift, then compare the other options in the table before deciding.

Does Zello run on the phones an ironworker crew already carries?

Zello runs on iOS, Android, Windows, and Mac [3]. Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. Zello Enterprise Server can be deployed on-premise [3]. Crew members should confirm that every phone on the job is one of those systems, and check coverage and call reliability with the provider.

What does Peak PTT cost for an ironworker crew?

Peak PTT's PTT-84G is a 4G LTE push-to-talk radio priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts [4]. Peak PTT says both of its radios are backed by a lifetime hardware warranty with an active service plan [4]. Because this is radio hardware rather than a phone app, the crew should compare the upfront cost per person with a per-user phone option before deciding.

Can GroupTalk send a lone ironworker's alarm to the crew?

GroupTalk's page says lone workers can alert nearby colleagues and central resources immediately [6]. GroupTalk offers a free 14-day trial [5]. Before the crew commits, ask GroupTalk which features the trial includes, and confirm that the alarm reaches the people on the site who need it, including anyone working at height or out of sight of the crew.

How does OperatorLink show a STOP to a crane crew?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it [1]. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [1].

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Zello, zello.com/pricing, read 2026-10-08
  3. Zello, zello.com, read 2026-10-08
  4. Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
  5. GroupTalk, grouptalk.com, read 2026-10-08
  6. GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08

Related comparisons