2Dig Plain comparisons of crane signalling and jobsite communication tools

Push-to-talk apps for crane crews for gantry crane operators in 2026

Push-to-talk apps for crane crews compared for gantry crane operators: OperatorLink, Zello, Voxer, GroupTalk, and Peak PTT.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Push-to-talk apps for crane crews compared for gantry crane operators: OperatorLink, Zello, Voxer, GroupTalk, and Peak PTT. A gantry crane operator runs a load along the span from a cab and can lose sight of the pick, so the signal person's direction has to reach the cab and stay visible until the crew registers it. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser [1]. HOLD and SLOW stay on until the last person leaves, and STOP releases every held direction on every phone with a full-screen alert [1][1]. OperatorLink is free to use, and no paid plan is built yet [1]. Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription [2]. Voxer's Personal plan is free [3]. GroupTalk offers a free 14-day trial [4]. Peak PTT radio service is $24.95 per month per radio [5]. Compare how long a signal stays up, who can join, coverage, and price.

OptionUp-front costMonthly costDevice and join
OperatorLinkFree, no paid plan built yet [1]Free [1]Phone browser, no app install; crew joins from a shared link or QR code [1][1]
ZelloFree 14-day trial, no credit card required [2]From $8.00 per user per month, $6.80 with annual subscription [2]Runs on iOS, Android, Windows, and Mac [6]
VoxerPersonal plan free [3]; 14-day business trial [7]Not publishedNot published
GroupTalk14-day free trial [4]Not publishedPrivate cloud or on-premises deployment [4]
Peak PTT$229 per radio plus $19.95 activation fee [8]$24.95 per month per radio [5]LTE radio hardware transmitting over AT&T's nationwide network [8]

What gantry crane operators need from push-to-talk apps for crane crews

A gantry crane operator sits in a cab that rides a rail span and moves loads across the floor or yard. From the cab the operator can lose sight of the load and the landing zone, so a signal person on the ground directs each move. A rigger attaches the load and guides it to rest. The operator has to act on the signal while holding the load steady, so a missed or cleared direction can pause the pick mid-swing. The tools an operator needs should show direction signals on every phone and keep them visible until every person on the crew has registered them. Each tool below is listed with what its source says it does, so the crew can check each one. Voice is useful for checking in, but direction signals have to stay on screen rather than depend on the next spoken word. Gantry cranes run indoors or out, so coverage and where the crew works matter. The crew should compare how each tool passes a signal, how long it stays up, who can join, what each person must do to get started, and whether it reaches the parts of the site where the crane operates.

OperatorLink for gantry crane operators

OperatorLink is made by the team that publishes this site. It runs in a phone browser, so no app install is needed. [1] It passes button presses, chat and voice between phones in a browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Zello for gantry crane operators

Zello offers a free 14-day trial with no credit card required. [2] Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2] Zello runs on iOS, Android, Windows, and Mac. [6]

Voxer for gantry crane operators

Voxer's Personal plan is free. [3] Voxer offers a 14-day free trial for business. [7] Voxer integrates with Procore contacts to create groups. [9] Beyond those points the facts say little more, so a crane crew should ask Voxer directly what devices it supports and what its paid plans cost per user.

GroupTalk for gantry crane operators

GroupTalk offers a free 14-day trial. [4] The page also offers a sales contact. [10] GroupTalk also offers private cloud and on-premises deployment options. [4] Beyond those points the facts say little more here, so a crane crew should ask GroupTalk what it publishes about its plans and pricing and which devices it supports.

Peak PTT for gantry crane operators

Peak PTT is push-to-talk radio hardware rather than a phone app. The PTT-84G is priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts. [8] Core radio service is $24.95 per month per radio. [5] The radios transmit voice over AT&T's nationwide LTE network. [8]

Matching the tool to the job

HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] When a STOP is sent, it releases every held direction on every phone and shows a full-screen alert to everyone else. [1] For quick check-ins between picks, an operator can send one-tap radio-style calls such as Go Ahead, Copy That and All Clear without typing. [1] Zello runs on iOS, Android, Windows, and Mac. [6] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1]

Questions to ask before you choose

Does a direction stay on every screen until each person confirms it, or does it clear the moment a finger lifts? Can a crew member join from a link, or does a manager need to set up accounts and groups first? What happens to a signal when a phone loses connection for a few seconds? On which devices can each person receive the tool, and are they the phones the crew already carries? Is the coverage enough for the parts of the site where the gantry crane runs, or are there dead spots? Who pays, and is the price per user, per radio, or per month, and does it change on an annual plan? How long does a free trial run, and what must be shared to start one? For a crew that works at height and out of sight, does the tool keep a direction visible until the move is complete?

Frequently asked questions

Do push-to-talk apps work for crane signals on a phone?

A push-to-talk tool carries voice, and some also pass direction signals. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser; HOLD and SLOW stay on until the last person leaves, and STOP releases every held direction with a full-screen alert. [1][1][1] Ask each provider how far its tools reach on the site before relying on one.

Is there a free push-to-talk app for a crane crew?

Yes. OperatorLink is currently free to use, and no paid plan is built yet. [1] Zello offers a free 14-day trial with no credit card required. [2] Voxer's Personal plan is free. [3] GroupTalk offers a free 14-day trial. [4] Compare how long a signal stays visible before relying on any free option.

What does push-to-talk cost per month?

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2] Peak PTT charges $24.95 per month per radio, on top of a $229 per-radio price and a $19.95 activation fee. [5][8] OperatorLink is currently free, with no paid plan built yet. [1] Voxer and GroupTalk pricing is not published here, so ask them what they charge per user.

Can an operator hold a STOP that everyone on the crew sees?

Some tools keep a direction visible rather than drop it when a finger lifts. OperatorLink keeps STOP, HOLD and SLOW on for everyone in the jobsite and clears them when the last person leaves, and STOP releases every held direction and shows a full-screen alert to everyone else. [1][1] For other tools, ask how long a direction stays on screen and whether it clears when the person stops holding it.

What device is needed for push-to-talk?

OperatorLink runs in a phone browser with no app install and can be added to a phone's home screen. [1][1] Zello runs on iOS, Android, Windows, and Mac. [6] Check which devices the rest of the crew already carries, and ask each provider what its tool runs on before the crew relies on it.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Zello, zello.com/pricing, read 2026-10-08
  3. Voxer, voxer.com/plans-and-pricing, read 2026-10-08
  4. GroupTalk, grouptalk.com, read 2026-10-08
  5. Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
  6. Zello, zello.com, read 2026-10-08
  7. Voxer, voxer.com/business, read 2026-10-08
  8. Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
  9. Voxer, voxer.com/construction, read 2026-10-08
  10. GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08

Related comparisons