2Dig Plain comparisons of crane signalling and jobsite communication tools

Push-to-talk apps for crane service technicians, compared

Crane service technicians compare push-to-talk apps by cost, device and the signals each one passes to the crew, with a table of the options.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

OperatorLink shows STOP, HOLD and SLOW to a crew in a phone browser, and it is currently free to use [1][1]. The other tools on this page have their own prices, devices and setup, which are set out in the table below.

OptionUp-front costMonthly costDevice or setup
OperatorLinkFree to use; no paid plan is built yet [1]Free [1]Phone browser, no app install [1]
ZelloFree 14-day trial, no credit card required [2]$8.00 per user per month, or $6.80 with an annual subscription [2]Runs on iOS, Android, Windows, and Mac [3]
GroupTalkFree 14-day trial [4]Not publishedNot published
Peak PTTPTT-84G radio priced at $229, with a $19.95 activation fee, and no contracts [5]$24.95 per month per radio on Tier-1 United States carrier native SIMs [6]Push-to-talk radio, with voice over AT&T's nationwide network [5][5]
VoicePingNot publishedStandard $2 per user per month and Plus $4 per user per month, both billed annually [7][7]Walkie talkie app for Android, iOS and desktop [8]
ESChatFree 30-day trial [9]Cloud hosted ESChat service, $5.99 per user per month [10]Push-to-talk for smartphones and IoT devices [9]

What crane service technicians need from push-to-talk apps for crane crews

Crane service technicians inspect, repair and test cranes, often with an operator in the cab and sometimes with a rigger or signal person on the ground. During a test run or a brake check, a technician may need to stop a move at once, or confirm that a repair is ready before anyone goes back to work. Much of this happens at height, in noise, and with gloves on, so a tool needs large controls and clear alerts. Technicians also move between cranes and shop areas, and a call that drops mid-task can leave them unsure whether the operator heard. A crew should compare each tool on how a stop is shown, how a call is started, how the crew joins, what the tool costs, and whether its network reaches the parts of the site where the work is done.

OperatorLink for crane service technicians

OperatorLink is made by the team that publishes this site. It runs in a phone browser, so no app install is needed. [1] It passes button presses, chat and voice between phones in a browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages, so a technician can check in with one tap. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Zello for crane service technicians

Zello runs on iOS, Android, Windows, and Mac. [3] It offers a free 14-day trial with no credit card required. [2] Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2] The facts gathered for this page do not describe how Zello keeps a stop or hold on every crew phone, so ask Zello how a direction stays on screen before a crew depends on it.

GroupTalk for crane service technicians

GroupTalk offers a free 14-day trial. [4] It offers private cloud and on-premises deployment options. [4] NCC, Entry, Veidekke, and YIT are named as construction companies that have chosen GroupTalk. [11] GroupTalk's monthly price is not published here, so ask GroupTalk for its cost per user before comparing. Ask also how a technician sends a stop-type signal to the crew, since the facts used for this page do not cover it.

Peak PTT for crane service technicians

The PTT-84G is a push-to-talk radio, priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts. [5] Core radio service is priced at $24.95 per month per radio on Tier-1 United States carrier native SIMs. [6] Voice is transmitted over AT&T's nationwide LTE network. [5] Ask how many radios a crew needs before budgeting, and whether the radios suit the technicians who carry them.

VoicePing for crane service technicians

VoicePing's Standard plan costs $2 per user per month, billed annually. [7] Its Plus plan costs $4 per user per month, billed annually. [7] Ask VoicePing which plan includes the features a technician needs, and how its signals behave on the phones the crew already carries.

ESChat for crane service technicians

ESChat offers a free 30-day trial. [9] The Cloud Hosted ESChat Service costs $5.99 per user per month. [10] LMR interoperability and historical tracking and mapping are available for an additional monthly fee of $2.00 per user per month. [10] Ask ESChat which plan a crew of technicians would use, and what the extra tracking fee adds to the monthly total.

Matching the tool to the job

A technician who must stop a crane's move during a test run needs the signal to reach the operator at once. OperatorLink's STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] A technician checking in between repairs can use one-tap calls such as Copy That or All Clear. [1] A crew with a short job can share one jobsite link, whose link stops working 12 hours after the first person joins. [1][1] A crew that wants a per-user monthly price can compare Zello Work, which is charged per user. [2] Peak PTT charges $24.95 per month per radio on Tier-1 United States carrier native SIMs. [6] A crew with phones and desktop computers can check the devices VoicePing's walkie talkie app is available for. [8] A technician who works away from the rest of the crew should check how each tool raises an alarm and who receives it, since the facts used for this page do not describe that for every tool.

Questions to ask before you choose

Does a stop or hold stay on every phone until the crew clears it, or does it clear when a finger lifts? Can a technician join from a link, or must someone set up each person first? What happens to a signal when a phone loses connection for a few seconds? Which phones does the crew already carry, and does the tool run on them? Does the network reach every part of the site where the work happens, including the crane itself? What is the price per user, per radio, or per month, and does an annual plan change it? How long does a free trial run, and what must be shared to start one? Does the tool raise an alarm for a technician working alone, and who receives it? For Orion and Microsoft Teams Walkie Talkie, no facts are published on this page, so check their own pages for each of these answers.

Frequently asked questions

Does OperatorLink show crane signals to a crew on a phone?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser. [1] HOLD and SLOW stay on for everyone until the last person leaves. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Check how each other tool on this page keeps a direction on screen, because the facts used for this page do not cover that for every tool.

Is there a free push-to-talk app for crane service technicians?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Zello offers a free 14-day trial with no credit card required. [2] GroupTalk offers a free 14-day trial. [4] ESChat offers a free 30-day trial. [9] A trial ends on its own schedule, so check what it includes and what the paid price will be before the crew starts using a tool.

What does push-to-talk cost per month for each tool?

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2] Peak PTT charges $24.95 per month per radio for unlimited nationwide push-to-talk on Tier-1 United States carrier native SIMs. [6] VoicePing's Standard plan costs $2 per user per month, billed annually, and its Plus plan costs $4 per user per month, billed annually. [7][7] OperatorLink is currently free to use. [1] GroupTalk's monthly price is not published here.

Does OperatorLink need an app install on a crew phone?

OperatorLink runs in a phone browser, so no app install is needed. [1] It can also be added to a phone's home screen as a standalone app. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check which phones the crew already carries, and ask each other provider what its tool runs on before relying on it.

How long does a jobsite link last in OperatorLink?

A jobsite link stops working 12 hours after the first person joins it. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] If nobody is in a jobsite for 3 idle hours, the crew's online space for it is deleted. [1] A crew whose work runs past 12 hours should plan for that window before the job starts. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Zello, zello.com/pricing, read 2026-10-08
  3. Zello, zello.com, read 2026-10-08
  4. GroupTalk, grouptalk.com, read 2026-10-08
  5. Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
  6. Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
  7. VoicePing, voicepingapp.com/pricing, read 2026-10-09
  8. VoicePing, voicepingapp.com, read 2026-10-09
  9. ESChat, eschat.com, read 2026-10-10
  10. ESChat, eschat.com/pricing, read 2026-10-10
  11. GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08

Related comparisons