2Dig Plain comparisons of crane signalling and jobsite communication tools

Push-to-talk apps for crane crews for crane inspectors in 2026

Push-to-talk options for crane inspectors compared on price and devices, with OperatorLink, Zello, GroupTalk, Peak PTT and VoicePing.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Crane inspectors often need to call a halt and stay in touch with the crew while they move around a site. OperatorLink shows STOP, HOLD and SLOW to the crew in a phone browser. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1] The table below sets price and devices side by side for each option.

OptionUp-front costMonthly costDevices
OperatorLinkFree to use; no paid plan is built yet [1]Free [1]Phone browser, no app install [1]
ZelloFree 14-day trial, no credit card required [2]$8.00 per user per month, or $6.80 with an annual subscription [2]iOS, Android, Windows, and Mac [3]
GroupTalkFree 14-day trial [4]not publishednot published
Peak PTT$229 for the PTT-84G radio plus $19.95 activation fee [5]$24.95 per month per radio for unlimited push-to-talk [6]LTE push-to-talk radio on AT&T's nationwide network [5][5]
VoicePingnot publishedStandard $2 and Plus $4 per user per month, both billed annually; Enterprise after a sales estimate [7][7][7]Walkie talkie app for Android, iOS and desktop [8]

What crane inspectors need from push-to-talk apps for crane crews

Crane inspectors check the crane, its rigging and the load path before and during lifts. They often stand well away from the cab to see what the operator cannot, so they need a way to reach the crew without shouting across the site. A message that arrives late can leave an operator moving a load that an inspector has already flagged. Inspectors also move between the crane, the rigging area and the ground crew, so a tool that runs on a phone they already carry is easier to keep with them than a separate device. What matters most is whether a direction stays visible until the people who need it have seen it, and whether a halt reaches everyone at once. Gloves, noise and wind make small buttons hard to press, so large, clear controls count for a lot. Inspectors should also check how far the signal reaches on their own site, because a tool is only as useful as the connection it runs on. The site's own signal rules still decide who may give a signal and when, and no app changes those rules.

OperatorLink for crane inspectors

OperatorLink is made by the team that publishes this site. It runs in a phone browser, so no app install is needed, and it can be added to a phone's home screen as a standalone app. [1][1] It passes button presses, chat and voice between phones in a browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone on the site and clear when the last person leaves. [1] Holding a move keeps sending it to the other phones, and if it stops arriving for 2 seconds, they drop it. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a site shares a link or QR code, and the crew joins from it. [1] A site link stops working 12 hours after the first person joins it. [1] A site with nobody in it is wiped after 3 idle hours. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1]

Zello for crane inspectors

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2] Zello runs on iOS, Android, Windows, and Mac. [3] Because the price is per user, count how many people on the crew would need it before comparing it with a per-radio price. [2]

GroupTalk for crane inspectors

GroupTalk offers a free 14-day trial. [4] GroupTalk's page says construction sites can use live location tracking, alarms and group communication to run safety procedures. [9] GroupTalk also offers private cloud and on-premises deployment options. [4] For its monthly price, ask GroupTalk directly before comparing.

Peak PTT for crane inspectors

The PTT-84G is a 4G LTE push-to-talk radio, priced at $229 with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts. [5] Peak PTT says its pricing is predictable and flat, with per-device monthly pricing. [5] The listing describes a radio rather than a phone app. [5]

VoicePing for crane inspectors

VoicePing's Standard plan costs $2 per user per month, billed annually. [7] Its Plus plan costs $4 per user per month, billed annually. [7] The Enterprise plan is priced after contacting sales for an estimate. [7] Ask VoicePing whether its plans cover the devices the crew already carries before choosing one.

Matching the tool to the job

Calling a halt is the job that most needs a direction to stay visible to everyone on the crew. OperatorLink's STOP releases every held direction and shows a full-screen alert to the other phones, and its HOLD and SLOW stay on until the last person leaves. [1][1] An inspector who needs to send a short update can use one-tap calls such as Go Ahead and Copy That, which arrive as chat messages. [1] When the crew needs spoken talk as well, the voice call run from the phone browser covers it. [1] For a crew that wants a dedicated radio, Peak PTT's radio is priced at $229 with a $19.95 activation fee. [5] An inspector who works alone should ask GroupTalk how its alarms reach colleagues and central staff before relying on it. For a crew priced per user, Zello Work costs $8.00 per user per month, and VoicePing's Standard plan costs $2 per user per month, billed annually. [2][7] An inspector who wants to start free can use OperatorLink, which is free to use, or GroupTalk's 14-day trial. [1][4]

Questions to ask before you choose

Does a direction stay on every phone until the crew has seen it, or does it clear when a finger lifts? Can a crew member join from a link or code, or does someone need to set up the group first? What happens to a signal when a phone drops its connection for a few seconds? Which phones can run each tool, and are they the phones the inspectors already carry? Is the coverage enough for the parts of the site where inspectors work, from the crane base to the far end of the load path? Is the price per user, per radio, or per month, and does an annual plan change it? How long does a free trial run, and what must be shared to start one? Does the tool keep a record of what was sent and when? Who can open a link, and can access be limited to the crew?

Frequently asked questions

Can OperatorLink show crane signals to inspectors on a phone?

OperatorLink shows STOP, HOLD and SLOW to the crew in a phone browser, so no app install is needed. [1][1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1][1] Before relying on any option for a lift, ask each provider what happens when a phone drops its connection for a few seconds.

Is there a free push-to-talk app for crane inspectors?

OperatorLink is currently free to use, and no paid plan is built yet. [1] GroupTalk offers a free 14-day trial. [4] A free start shows little about how a tool behaves on a lift, so try the signals with the crew before choosing either one.

What does push-to-talk cost per month for crane inspectors?

Zello Work costs $8.00 per user per month, or $6.80 with an annual subscription. [2] VoicePing's Standard plan costs $2 per user per month, and its Plus plan costs $4 per user per month, both billed annually. [7][7] Peak PTT's PTT-84G radio is priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk. [5] OperatorLink is free to use. [1]

Can GroupTalk track a lone inspector on a construction site?

GroupTalk's page says construction sites can use live location tracking, alarms and group communication to run safety procedures. [9] It also offers private cloud and on-premises deployment options. [4] Ask GroupTalk how its alarms reach colleagues and how location is shown before you commit to it.

Does OperatorLink need an app install on an inspector's phone?

No app install is needed, because OperatorLink runs in a phone browser. [1] It can also be added to a phone's home screen as a standalone app. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check which phones the inspectors carry, since that decides whether the buzz helps.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Zello, zello.com/pricing, read 2026-10-08
  3. Zello, zello.com, read 2026-10-08
  4. GroupTalk, grouptalk.com, read 2026-10-08
  5. Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
  6. Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
  7. VoicePing, voicepingapp.com/pricing, read 2026-10-09
  8. VoicePing, voicepingapp.com, read 2026-10-09
  9. GroupTalk, grouptalk.com/why-grouptalk/we-across-industries/construction, read 2026-10-08

Related comparisons